IGO-T Titanium Rebuildable Atomizer
IGO-T Titanium Rebuildable Atomizer


List Price: $26.57
Sale Price: $6.99
Earn 7 Reward Points!

Stock Status:Out Of Stock

Product Code: YD-IGOT

Description Warnings
IGO-T Titanium Rebuildable Atomizer

  • Titanium Cap and Base, Stainless post and screws
  • Light weight: 15g
  • Drip Atomizer
  • Sealed battery connector
  • 2 Airholes located on outer casing (see images)
  • 510 Threaded
  • Two philips head screws for positive/negative post
  • Extra post for Single or Dual Coil configuration
  • Rebuild using fiberglass or silica rope and wire
  • Stainless steel body and base
  • Fits most 510 drip tips
  • Wick and wire sold separately

Dimensions: 1" x 3/4" (length x diameter)

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Package Contents:
  • 1 x IGO-T Titanium Rebuildable Atomizer
  • 1 x Bag of spare parts

Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 31 Write a review

  2 of 2 people found the following review helpful:
5 of 5 Lightweight December 15, 2020
Reviewer: Chris from TX United States  
Light titanium is great, strong as steel. This has two small air holes, intended for mtl dual coils. I tape one shut and use single coils. But the holes are small, so for tight draw only.  For me, I prefer tighter draw over free flow air.
Also, this is a variation on the igo-L, and parts are fully interchangeable, same exact size.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
3 of 5 Will not fit all devices. January 9, 2016
Reviewer: Anonymous Person  
The post is too short for the evic vtc-mini.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
4 of 5 Sweet January 2, 2016
Reviewer: william b from johnstown, CO United States  
I was looking for a small RDA to fit a Joytech Ego One battery, this is almost a perfect fit.  Flavor with the small vent holes is good, if you want clouds expect to drill it out some.  Only ding I have is the screws are drilled all the way down the post so the screw + opening acts like guillotine to the wire if you are not real careful.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
1 of 5 unsatisfied September 13, 2015
Reviewer: Nick Borja from APO, AE United States  

Was this review helpful to you?

  0 of 1 people found the following review helpful:
2 of 5 disappointed July 30, 2015
Reviewer: Daniel P. from Warners, NY United States  
I thought this would be a nice flavor-chaser RDA to have around for testing liquids, but so far I'm not impressed--even considering the low price. First off, the screws are so sharp I am cutting off 26ga wire, so I have to wrap the wire around the screws to secure the wire. Second, the pilot airholes are positioned such that when I attempt to drill them out the new hole is partially covered by the drip-well lip (only tried a 5/64 drill bit). Lastly, just not getting any flavor out of this atty.  I'll try a few more builds, but no luck so far.

Was this review helpful to you?

View All Customer Reviews