Home >

Wismec Luxotic Surface with Kestrel Kit
Wismec Luxotic Surface with Kestrel Squonk Kit

Images are for illustration purposes only. Actual color, finish and packaging may vary.

List Price: $89.99
Our Price: $57.99

Price with Selected Options: $57.99

Stock Status:Out Of Stock
Product Code: WIS-LSU10




Featured e-Liquids

Featured Nicotine Salt e-Liquids

Featured Pod Disposables




Description Warnings
Wismec Luxotic Surface 80W Squonk Mod with Kestrel Tank Squonk Kit

The Wismec Luxotic Surface Squonk vape mod builds upon the Wismec Luxotic series with an all new redesign and numerous improvements designed for the squonking enthusiast. The Luxotic Surface features a bottom feeding design with a 6.5ml capacity juice delivery system. Simply squeeze the squonk bottle located inside the Luxotic Surface into your favorite bottom feeding RDA or RTA for pure flavor and satisfaction. The Luxotic Surface is powered by the Avatar chip which can fire up to 80 watts and supports multiple temperature control modes. The Luxotic Surface also features a bypass mode, preheat function, and a stealth mode as well. The Luxotic Surface can fire at an almost instantaneous firing speed for immediate satisfaction. The Luxotic Surface features a compact box design with a stylized front panel. The Luxotic Surface is powered by (1) high amp 18650 battery (sold separately) and requires an external battery charger (sold separately) to recharge your batteries.

The Wismec Kestrel tank features a unique RDTA (rebuildable tank atomizer) design that doesn't utilize a traditional coil like other tanks. The Kestrel utilizes a unique Kestrel kanthal mesh heater which features a larger heating area and a longer life span compared to traditional coils. The Kestrel heater can be easily rewicked using the included cotton pad. The Kestrel comes pre-installed with a bottom feeding squonker pin for squonk/bottom feeding mods. The Kestrel is finally topped off with a beautiful resin wide bore drip tip.

Quick Links:
Our Premium e-Liquid
Wick, Wire and Tools

Features and Specs for Wismec Luxotic Surface Mod:

  • Powered by Avatar Chip
  • Bottom Feeding Design
  • Juice Delivery System
  • 6.5ml Capacity Squonk Bottle (Pre-installed)
  • Dimensions: 3-1/16" x 1-11/16" x 15/16" (Without Tank)
  • Spring Loaded 510 Contact Pin
  • Output Wattage: 1.0 - 80.0W
  • Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Mode
  • Temperature Control Range: 100 - 315C / 200 - 600F
  • Resistance Range: 0.05 - 3.5ohm
  • Instant Firing Speed: 0.001s
  • Bypass Mode
  • Preheat Function
  • Stealth Mode
  • 0.49" OLED Display Screen
  • Compact Box Design with Stylized Front Panel
  • Requires (1) High Amp 18650 Battery (Sold Separately)
  • Requires an External Battery Charger (Sold Separately)
  • Includes Replacement Squonk Bottle
  • Short Circuit Protection
  • Temperature Protection
  • Over-charge Protection
  • Reverse Polarity Protection
Features and Specs for Wismec Kestrel Tank:

  • Dimensions: 1-7/16" x 15/16" (Including Drip Tip and Threads)
  • Diameter: 24mm
  • 510 Threaded
  • E-Liquid Capacity: 2.0ml
  • RDTA Design
  • Side Fill Design
  • Glass Tank
  • Dual Airflow Slots
  • Adjustable Airflow Top Cap
  • No Coil and Rewickable Design with Cotton Included
  • Larger Heating Area
  • Utilizes Wismec Kestrel Kanthal Mesh Heater 0.25ohm for Wattage
  • Includes Bottom Feeding Squonker Pin for Squonk/Bottom Feeding Mods (Pre-installed)
  • Resin Wide Bore Drip Tip

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it

Package Contents:
  • 1 x Wismec Luxotic Surface Mod
    1 x Wismec Kestrel Tank
    2 x Kestrel Mesh Heater 0.25ohm (Pre-installed)
    1 x Replacement Glass
    1 x Replacement Squonk Bottle
    1 x Cotton Pad
    1 x Set of Spare Parts

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 4 Write a review

  0 of 0 people found the following review helpful:
5 of 5 Mines really nice. July 10, 2019
Reviewer: Amy from The United States of America  
I'm not a huge fan of the door designs but can overlook it. Maybe they'll make some plain one that'll fit but whatever. I got this for the squonk mod. Mine works great. This thing is tiny too, and it's pretty light weight. It feels really nice in the hand and in a pocket. My RDAs sit flush and it squonks really well. This is my first of the Luxotic line but not my last. I'm getting another one of these for sure and maybe a BF.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
5 of 5 Great little squonk mod July 1, 2019
Reviewer: Timmy Thurman from Battle Creek , MI United States  
The kestrel is ok nothing special or wrong with it. But the mod is great. Small and lightweight. Really easy to use and pocket friendly. The only one I think is nice is the basketball. They others look like 80’s rejects lol. But that’s just my opinion. I’ve had mine since the dropped and never had a problem. The paint is still in good shape (besides normal wear on the bottom from sitting it down). I use my g.r1 with it more than the one that came with it. But all the rdas I put on it didn’t have any gaps.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
1 of 5 Stopped working May 13, 2019
Reviewer: David Fawcett from Newark, DE United States  
This mod lasted a whole 3 days. It will not read any rda that I put on it. Not very good.
Good luck to any who puts out the money for this.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
4 of 5 very good May 8, 2019
Reviewer: gary from NC United States  
The most Enovative squonker on the market today!

Was this review helpful to you?