Home > Sale > Hardware >

Vision Spinner VV eGo Battery 1300mAh
Vision Spinner VV eGo Battery 1300mAh


 
Images are for illustration purposes only. Actual color, finish and packaging may vary.



List Price: $24.95
Our Price: $17.99

Availability: In Stock
Product Code: VS-S1300

Color



Qty:  
Description Warnings
 
Approx. dimensions: 4.45 in. x 0.66 in.

Vapros by Visiontech

This is the highest capacity variable voltage eGo available today! Vape at your desired voltage! Higher voltage = More vapor! The Vision Spinner is compact making it the most portable variable voltage device available. Don't forget the high capacity battery cell... Vape for hours on a single charge!*

The Spinner has a dial located at the base of the battery. The Spinner has four markings to indicate approximate output voltages at 3.3, 3.8, 4.3, and 4.8 volts but is adjustable throughout the entire voltage range. Simply turn the dial to your desired vaping voltage. It features an easy to read numbered dial.




Newer versions of the Vision Spinner battery require one button push to activate the charge. To charge: Fasten the Spinner battery to a Joye Ego Rapid Charger (sold separately), if the battery button does not flash and the charger light does not turn red, activate the charge by pushing the battery button once. The button light should now flash and the charger light should turn red to indicate that a charge is in progress. The charger light will turn green when the charge is complete.




*Please Note: Results may vary. Using the battery at a higher voltage output will drain the battery quicker than when using it at a lower voltage. Standard Joye eGo series batteries output a regulated voltage of approximately 3.2v.

Tech Specs:

510 Threaded: Compatible with all of our Joye eGo Series atomizers and cartomizers, 510 Series atomizers and cartomizers. Charge this battery using a Joye eGo Rapid USB Charger.

Variable Voltage Output: Voltage can be adjusted from 3.2V~4.8V

Short Circuit Protection:
When a short is detected, the battery will shutdown until the short is removed.

Lockable: Press the button 5 times within 1.5 seconds to lock or unlock the battery. The battery LED will blink when switching modes. When the battery is in lock mode, the button is disabled and the battery will not power an atomizer or cartomizer.

Atomizer Protection/Cutoff Timer:
If the button is depressed for 10 seconds, the battery will shutoff until the button is released.

Battery Monitoring/Over-Discharge Protection: The device will monitor the battery voltage and automatically turn off when the battery is discharged, preventing damage to the battery by overly depleting it. The LED will blink 5 times indicating that a charge is need.
Package Contents:
  • 1 x Vision Spinner VV eGo Battery 1300mAh

Average Customer Review: 4.5 of 5 Total Reviews: 743 Write a review

  0 of 0 people found the following review helpful:
 
Was good when it worked December 10, 2018
Reviewer: Anonymous Person from Alpharetta, GA United States  
This was my first vape ever, I bought this battery with a kanger tank. The battery life could've lasted longer before needing to be charged. After discovering actual mods i'm never going back to these. They're dinosaurs compared to mods out now. If you're looking at any stick mods like these, just save up and get a full on mod. They are worth it sooooo much more than these things

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great! October 17, 2018
Reviewer: Patrick Doty from Ridgefield, CT United States  
Works as advertised

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
October 8, 2018
Reviewer: Kimberly Brown from Elk Grove, CA United States  


Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Faulty wiring? Does not function September 28, 2018
Reviewer: Jacob Harris from Buffalo, NY United States  
I received the package promptly which I was pleased with but the battery didnt work out of the box after an initial charge. I did a troubleshoot and found a common issue regarding circuit pin connection, where the pin is too low therefore not providing a physical connection but I tried fixing the issue that way and it didnt work. This leads me to believe there is faulty wiring and instead of trying to repair it myself is it possible to somehow have it replaced? Thanks

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
My old favorite September 27, 2018
Reviewer: Sherry Maxwell from Niota, TN United States  
Back to my favorite vape pens. Works great!!

Was this review helpful to you?

View All Customer Reviews