Vaporesso GEN Nano Mod with GTX 22 Tank Sub-Ohm Tank Starter Kit

The Vaporesso GEN Nano Vape Kit features the lightweight GEN Nano mod which is a much more compact version of the original GEN series with a new built-in battery. The GEN Nano is powered by the new AXON chip with all new features along with the original OMNI Board chip features. The AXON chip features new modes such as the pulse, power ECO, and smart temperature control modes. The Pulse mode continuously gives you a hit throughout your puff (every 0.02 seconds) giving you even more powerful, flavorful clouds with every puff. The Power ECO mode optimizes the settings of your GEN Nano mod to maximize battery life. The Smart Temperature Control mode will automatically recognize your temperature control coil. The GEN Nano can fire up to 80 watts and supports multiple temperature control settings. The GEN Nano is now powered by a built-in 2000mAh battery that may be charged via the micro USB charging port.

The Vaporesso GTX 22 sub-ohm tank features a 3.5ml e-Liquid capacity which is easily filled from the top using the simple twist off cap. The GTX 22 tank features a simple push and pull coil replacement system for easy coil replacements. The tank features dual airflow slots that may be adjusted for maximum airflow. The GTX 22 tank is compatible with Vaporesso GTX mesh coil atomizer heads for a balance between flavor and vapor production.

Quick Links:
Our Premium e-Liquid
Replacement Atomizer Heads

Features and Specs for Vaporesso GEN Nano Mod:

• Powered by AXON Chip
• Dimensions: 70mm x 40.3mm x 23.2mm (Without Tank)
• 510 Threaded
• Output Wattage: 5 - 80W
• Built-in Battery Capacity: 2000mAh
• Temperature Control : Nickel 200 / Titanium / Stainless Steel
• Temperature Control Range: 100 - 315C / 200 - 600F
• Resistance Range: 0.03 - 5.0ohm
• Pulse Mode
• Power ECO Mode
• Smart Temperature Control Mode
• DIY Modes: VW, VV, VT, Bypass, CCW Modes Available
• Lightweight and Durable Design
  
• Compact Design
  
• 0.91" OLED Display Screen
• Micro USB Charging Port

Please note: Temperature control requires the use of nickel, titanium or stainless coils.

Features and Specs for Vaporesso GTX 22 Tank:

• Dimensions: 49.4mm x 22mm (Including Drip Tip and Threads)
• Diameter: 22mm
• 510 Threaded
• E-Liquid Capacity: 3.5ml
• Top Fill Design with Twist Off Cap
• Bulb Glass Tank
• Heating Insulation Layer
• Push and Pull Coil Replacement System
  
• Dual Airflow Slots
• Bottom Adjustable Airflow Control Valve
• Compatible with Vaporesso GTX Atomizer Heads
• Flax Cotton and Non-Woven Fabric Wick
  
• Includes (1) GTX Mesh Coil 0.2ohm Atomizer Head (45 - 60W)
• Includes (1) GTX Mesh Coil 0.6ohm Atomizer Head (20 - 30W)

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.