Home >

TigerTek Springer X RDA
TigerTek Springer X RDA  Rebuildable Dripping Atomizer

Images are for illustration purposes only. Actual color, finish and packaging may vary.

List Price: $28.99
Our Price: $19.99

Availability: DISCONTINUED
Product Code: TGT-SPR10


Description Warnings
TigerTek Springer X RDA - Screwless Rebuildable Dripping Atomizer

The TigerTek Springer X RDA is a unique rebuildable dripping atomizer that removes the idea of traditional screws and replaces it with special spring loaded clamp build deck. The Springer X RDA utilizes an easy to use push down clamp system to install your coils. Push down the spring loaded clamp, install your coil and release the clamp! The Springer X RDA supports both single and dual coil configurations on a gold plated build deck. The Springer X features dual airflow slots that may be adjusted. Choose from a single coil or dual coil airflow configuration for maximum vapor production. Springer X RDA includes both a delrin wide bore drip tip and a ULTEM wide bore drip tip. ULTEM is a high temperature plastic with a significantly higher melting point compared to Delrin.

Quick Links:
Our Premium e-Liquid
Wick, Wire and Tools

Features and Specs:

  • Dimensions: 1-5/8" x 15/16" (Including Drip Tip and Threads)
  • 24mm Diameter
  • Gold Plated 510 Contact Pin
  • 2ml Capacity Juice Well
  • Unique Spring Loaded Clamp Build Deck with No Screws Required
  • Easy to Use Push Down Clamp System
  • Gold Plated Build Deck
  • Designed for Single Coil and Dual Coil Builds
  • Dual Airflow Slots
  • Adjustable Airflow Cap
  • Choose from a Single Coil or Dual Coil Airflow Configuration
  • Wide Bore ULTEM Drip Tip
  • Wide Bore Delrin Drip Tip (510 Drip Tip Compatible)

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

Package Contents:
  • 1 x TigerTek Springer X RDA
    1 x Wide Bore ULTEM Drip Tip
    1 x Wide Bore Delrin Drip Tip
    2 x Replacement Springs
    1 x Set of Screws and O-Rings
    1 x Cotton Pad
    2 x Prebuilt Coils
    1 x Allen Key

Average Customer Review: 5 of 5 Total Reviews: 10 Write a review

  0 of 0 people found the following review helpful:
Original design June 7, 2018
Reviewer: Jesse Cuccurullo from Manhattan , NY United States  
No tools needed, just push down on deck and slide coils in. Easy peasy. Very convenient to use and deep wells for juice. A+ RDA

Was this review helpful to you?

  0 of 0 people found the following review helpful:
April 11, 2018
Reviewer: Mark Ellis from Ashburn, GA United States  
I love the spring loaded coil terminals. Thought it might be a weak hold but I was dead wrong. One of my favorite drippers now. The only draw back is the grip of the outside canister to the base. It's not loose enough that it leaks but it will spin a little to easy when trying to remove as one unit. Still use it daily, great flow.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Nice. Different. March 19, 2018
Reviewer: Vincent Cooper from Jackson Heights, NY United States  
No Grub Screws. Just push the Spring loaded Buttons.
Easy to Build. Good Flavor too :)

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Very Nice ! March 15, 2018
Reviewer: Vincent Cooper from Jackson Heights, NY United States  
Yes, installing Coils can be a bit hard, but not horrible.
I wish this RDA had come with a Squonk Pin.
Very nice on Flavor.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Fantastic!!! October 20, 2017
Reviewer: Michelle Trujillo from Chicago, IL United States  
I love my Springer X RDA!!! And I just watched a video about the Springer S that comes with the little plastic doohickey to help keep the Springs down when you're building your deck I wish I could get one of those for my Springer X!!!

Was this review helpful to you?

View All Customer Reviews