ShortStop by Holocron Labs

Holocron Labs are proud to present ShortStop

The Holocron Labs ShortStop is a wonderful product that helps you mitigate the dangers of using high powered lithium-ion/lithium polymer batteries in your device by preventing hard or dead shorts between your battery and what that battery is powering. This helps to prevent the battery ever getting hot enough to vent or catch fire. It works by watching how much current flows through it and when it notices a large amount of current, it springs into action and slows down the flow, preventing a hard short of the battery. The best analogy we can draw is that of a cars seat belt. It's loose and flexible until your car is involved in a crash, and then it locks down when you need it. The best part about ShortStop is that it is reusable. After ShortStop does its job, it simply needs a short cool down period before it is ready to use again.

ShortStop will fit in most devices using 18mm or larger cells ( 26650, 18650, 18500, etc.. ), because it is slightly smaller in diameter at approximately 17mm and only about 3mm thin. ShortStop has no polarity, meaning it works in any orientation and on either side of the battery. You can use ShortStop in multi-cell or 'stacked' configurations, so long as the sum of voltages of all of the cells in the series are less than or equal to 12 volts DC. ShortStop can be used with protected cells, and doing so will give you the peace of mind knowing that ShortStop will act at approximately 5 Amperes, providing a large flexibility in atomizer/cartomizer type and resistance. Bottom line, if it fits, it works and keeps working! Please make sure you read and understand all of the instructions and precautions included with your ShortStop before using.

ShortStop has been verified to work in the following devices and configurations:

1 x ShortStop by Holocron Labs

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use. For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use. Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email. Battery Safety Warning: Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion. Always charge in or on a fire-proof surface. Never leave charging batteries unattended. Do not modify batteries or chargers in any shape or form. Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire. Store your batteries away from the sun and heat to prevent overheating your batteries. Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged. Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V. myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.