SMOK Morph 219 Mod with TF Tank Starter Kit

The SMOK Morph 219 Kit features an incredibly advanced and futuristic vape mod based upon the incredibly popular SMOK Alien mod. The Morph 219 features a huge 1.9" color touchscreen display screen with a input keyboard. The Morph 219 features an updated and redesigned user interface for an easy to use vaping experience. A touchscreen lock button has been added to prevent accidental changes. The Morph 219 is powered by the new IQ-S chip which can fire up to 219 watts and supports multiple temperature control modes. The Morph 219 features a special mode called "My Mode" which allows you to create up to four customizable preset vape settings for quick changes on the go. The Morph 219 features a sleek glossy finish with a beautiful IML resin back panel design. The Morph 219 is powered by (2) high amp 18650 batteries (sold separately) and may be charged via the front micro USB charging port.

The SMOK TF Tank features a 6.0ml e-Liquid capacity that may be refilled using the top rotary fill design. The TF Tank features a durable stainless steel construction with a unique wide bore resin drip tip that is sure to stand out. The TF Tank features an elevated tank base which allows for even more airflow. The TF tank features ultra wide dual airflow slots that may be adjusted for incredible airflow and vapor production. The TF Tank utilizes new BF-Mesh coil atomizer heads optimized for intense flavor and vapor. The new mesh coil atomizer heads allow for a larger heating area and a faster heating process.

Quick Links:
Our Premium e-Liquid
Replacement Atomizer Heads
Blitz Replacement Resin Tanks

Features and Specs for SMOK Morph 219 Mod:

• Powered by IQ-S Chip
• Dimensions: 3-5/16" x 1-11/16" x 1-3/16" (Without Tank)
• Spring Loaded 510 Contact Pin
• Output Wattage: 1.0 - 219.0W
• Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS), TCR
• Temperature Control Range: 200 - 600F / 100 - 315C
• Resistance Range: 0.1 - 2.5ohm for Wattage Mode
  
• Resistance Range: 0.05 - 2.0ohm for Temperature Control Mode
• Instant Firing Speed: 0.001s
• My Mode: Four Customizable Preset Vape Settings
• Passcode Lock Function
• Preheat Function
• 1.9" Color Touchscreen Display with Input Keyboard
• Independent Touchscreen Lock Button
• Updated and Redesigned User Interface
• Glossy Finish
• IML Resin Back Panel Design
• Requires (2) High Amp 18650 Batteries (Sold Separately)
• *We recommend an external charger for optimal charging*
• Front Micro USB Charging Port

Please note: Temperature control requires the use of nickel, titanium or stainless coils.

Features and Specs for SMOK TF Tank:

• Dimensions: 2-1/8" x 15/16" (Including Drip Tip and Threads)
• Diameter: 25.4mm Base Diameter (30mm Overall Diameter)
• 510 Threaded
• E-Liquid Capacity: 6.0ml
• Top Rotary Fill Design
• Bulb Glass Tube
• Stainless Steel Construction
• Wide Bore Resin Drip Tip
• Elevated Tank Base
• Ultra Wide Dual Airflow Slots
• Bottom Adjustable Airflow Control Valve
• Includes (2) TF Tank BF-Mesh Coil 0.25ohm Atomizer Head (Pre-installed) (30 - 80W)
• Includes Tank Band
  

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.