GeekVape Z200 200W Starter Kit
Zeus 200 Starter Kit
The GeekVape Zeus 200 Starter is the newest addition to GeekVape's Zeus Edition Series Starter Kits. The GeekVape Z200 is a durable starter kit that utilizes GeekVape's own AS-Chip 3.0 capable of firing up to 200 Watts and offers multiple firing modes such as Temperature Control, & Power Mode. Featuring a large 2.4 full screen display the GeekVape Z200 Starter Kit utilizes two(2) external high-amp 18650 batteries (sold separately). The GeekVape Z200 Starter Kit comes paired with the GeekVape Zeus 2021 Sub-ohm Tank that features a top-airflow and leak resistant design. The GeekVape Zeus 2021 utilizes GeekVape's Z Series Atomizer Heads that delivers a smooth and flavorful experience.
Our Premium e-Liquid
Replacement Atomizer Heads
Features and Specs for GeekVape Z200 Mod:
Please note: Temperature control requires the use of nickel, titanium, or stainless steel coils.
- Shock Resistant
- Gold Plated 510 Contact Pin
- Output Wattage: 5.0 - 200.0W
- Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Mode
- Temperature Control: 100 - 315C / 200 - 600 F
- Resistance Range: 0.05 - 3.00ohm
- 2.4'' Full Display Screen
- New Lightweight Magnesium Alloy Construction
- Requires (2) High Amp 18650 Batteries (Sold Separately)
- *We recommend an external charger for optimal charging*
- Bottom Battery Door Cover with Lock
- Type-C USB Charging Port
Features and Specs for GeekVape Z 2021 Sub-ohm Tank:
- Dimensions: 2-1/8" x 15/16" (Including Drip Tip and Threads)
- Diameter: 26mm
- Gold Plated 510 Contact Pin
- E-Liquid Capacity: 5.0ml
- Top Fill Design with Twist Off Cap
- Upgraded Fill Port Design
- Bubble Glass Tank
- Zeus Logo
- Leak Resistant Design
- Top to Bottom Direct Airflow Design
- Dual Airflow Slots
- Top Adjustable Airflow Control Valve
- 810 Wide Bore Drip Tip
Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.
For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.
Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Battery Safety Warning:
Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.
Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.
Always charge in or on a fire-proof surface. Never leave charging batteries unattended.
Do not modify batteries or chargers in any shape or form.
Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.
Store your batteries away from the sun and heat to prevent overheating your batteries.
Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.
Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.
myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.