Eleaf Saurobox with ELLO Duro Starter Kit
The Eleaf Saurobox
features an incredibly lightweight resin material construction while retaining the power of dual 18650 batteries. The Saurobox features a smooth and comfortable finish perfect for all day vaping. The Saurobox can
fire up to 220 watts and supports nickel, titanium,
stainless steel 316 and TCR modes in temperature control mode. The Saurobox features a 0.96" TFT color display screen with a detailed user interface. The Saurbox
is powered by (2) high amp 18650 batteries (sold separately). The Saurobox may
be charged via the micro USB port using the included USB charging cable.
The Eleaf ELLO Duro Sub-Ohm Tank features an expanded 6.5ml e-Liquid capacity with the new convex glass design. The retractable top fill
design allows for easy and convenient refills. The ELLO Duro features triple airflow slots that may adjusted to your personal preferences. The ELLO Duro
utilizes new Eleaf HW atomizer heads which provide a well balanced stream of
flavor and vapor production. The design of the new HW-N Net and HW-M Multihole atomizer heads allow for a fast and even heating of the coil for intense flavor and vapor production.
Our Premium e-Liquid
Replacement Atomizer Heads
Features and Specs for Eleaf Saurobox Mod:
Please note: Temperature control requires the use of nickel, titanium, or stainless steel coils.
- Dimensions: 3-1/2" x 2" x 1" (Without Tank)
- 510 Threaded
- Operating Wattage: 1.0 - 220.0W
- Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Modes
- Temperature Control: 100 - 315C / 200 - 600F
- Resistance: 0.1 - 3.0ohm in Variable Wattage
- Resistance: 0.05 - 1.5ohm in Temperature Control Mode
- 0.96" TFT Color Display Screen
- Detailed User Interface
- Unique Resin Material Construction
- Ultra Lightweight Design
- Magnetic Battery Door Panel
- Requires (2) High Amp 18650 Batteries (Sold Separately)
- *We recommend an external charger for optimal charging*
- Micro USB Charging Port
- Firmware Upgradeable
- Short Circuit Protection
- Reverse Polarity Protection
Features and Specs for Eleaf ELLO Duro Tank:
Dimensions: 2-1/8" x 15/16" (Including Drip Tip and Threads)
- Diameter: 28mm
- 510 Threaded
- 6.5ml e-Liquid Capacity
- Retractable Top Fill Design
- Convex Glass Design
- Triple Airflow Slots
- Adjustable Airflow Control Valve
- Resin Wide Bore Drip Tip
- Utilizes New Eleaf ELLO HW Atomizer Heads for Balanced Flavor and Vapor Production
- Includes (1) ELLO HW-M Multihole Kanthal 0.15ohm Atomizer Head (Pre-installed)
- Includes (1) ELLO HW-N Net Kanthal 0.2ohm Atomizer Head
Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.
For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.
Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Battery Safety Warning:
Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.
Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.
Always charge in or on a fire-proof surface. Never leave charging batteries unattended.
Do not modify batteries or chargers in any shape or form.
Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.
Store your batteries away from the sun and heat to prevent overheating your batteries.
Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.
Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.
myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.