VooPoo VMATE Mod with UFORCE T1 Sub-Ohm Tank Starter Kit

The VooPoo VMATE Mod features an incredibly lightweight reinforced zinc alloy construction that allows for comfortable all day vaping without sacrificing power. The VMATE is powered by the GENE.Fan chip which allows the VMATE fire up to 200 watts and supports multiple control modes. The VMATE features unique ergonomic button placements with the fire button and adjustment buttons located at the top of the mod. The VMATE is powered by (2) high amp 18650 batteries (sold separately) which are easily replaced using the dual battery cover design. The VMATE is available in pewter (P) or silver (S) frames.

The VooPoo UFORCE T1 has been upgraded with a massive expanded 8.0ml e-Liquid capacity. The UFORCE T1 features a beautiful Steampunk inspired design along with a bubble glass tank. The UFORCE T1 may be conveniently filled from the top using the retractable top fill design. The UFORCE T1 features triple airflow slots that may be adjusted using the bottom airflow control valve for maximum vapor production. The UFORCE utilizes UFORCE OCC atomizer heads designed for wattage mode. This kit includes (1) UFORCE U2 Dual Coil 0.4ohm atomizer head and the new UFORCE N1 Single Mesh Coil 0.13ohm atomizer head.

Quick Links:
Our Premium e-Liquid
Replacement Atomizer Heads

Features and Specs for VooPoo VMATE Mod:

• Powered by the GENE.Fan Chip
• Dimensions: 3-1/2" x 1-3/4" x 1-1/8" (Without Tank)
• 510 Threaded
• Output Wattage: 5.0 - 200.0W
• Temperature Control: Nickel 200, Titanium, Stainless Steel 316 and TCR
• Temperature Control Range: 200 - 600F / 100 - 315C
• Resistance Range: 0.05 - 3.0ohm for Wattage Mode
  
• Resistance Range: 0.05 - 1.5ohm for Temperature Control Mode
• Ergonomic Button Placements
• Lightweight Design
• Reinforced Zinc Alloy Construction
• Dual Battery Cover Design
• Available in Pewter (P) or Silver (S) Frames
• Requires (2) High Amp 18650 Batteries (Sold Separately)
• From Micro USB Charging Port
• Battery Reverse Protection
• Short Circuit Protection

Please note: Temperature control requires the use of nickel, titanium or stainless coils.

Features and Specs for VooPoo UFORCE T1 Tank:

• Dimensions: 2-5/16" x 15/16" (Including Drip Tip and Threads)
  
• Diameter: 24.6mm
  
• 510 Threaded
  
• 8.0ml E-Liquid Capacity
• Retractable Top Fill Design
• Bubble Glass Tank
• Steampunk Inspired Design
  
• Triple Airflow Slots
  
• Bottom Adjustable Airflow Control Valve
• Utilizes UFORCE OCC Atomizer Heads for Wattage Mode
• Includes (1) UFORCE U2 Dual Coil 0.4ohm Atomizer Head (Pre-installed) (40 - 80W)
• Includes (1) UFORCE N1 Single Mesh Coil 0.13ohm Atomizer Head (50 - 100W)

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.