VooPoo DRAG 2 with UFORCE T2 Sub-Ohm Tank Starter Kit

The VooPoo DRAG 2 is now powered by the new GENE.FIT chip which adds new performance FIT modes for all sub-ohm tanks. The new FIT modes allows for optimization of battery life, flavor, or vapor production based on the mode selected. The DRAG 2 can now fire up to 177 watts and supports multiple temperature control modes. The DRAG 2 is 25% lighter in weight compared to the original DRAG. The DRAG 2 now features rounded corners with a micro-curve surface for a smooth and comfortable vaping experience. The DRAG 2 features a portable and ergonomic design with a lightweight zinc alloy construction. The DRAG 2 is powered by (2) high amp 18650 batteries (sold separately) and may be charged via the front micro USB charging port.

The VooPoo UFORCE T2 features a 5.0ml e-Liquid capacity which may be conveniently filled from the top using the retractable top fill design. The UFORCE T2 features a beautiful and sleek stainless steel construction with a resin wide bore drip tip on top. The UFORCE T2 features triple airflow slots that may be adjusted using the bottom airflow control valve for maximum vapor production. The UFORCE T2 utilizes UFORCE atomizer heads designed for wattage mode.

Quick Links:
Our Premium e-Liquid
Replacement Atomizer Heads

Features and Specs for VooPoo DRAG 2 Mod:

• Powered by the GENE.FIT Chip
• Dimensions: 3-7/16" x 2" x 1" (Without Tank)
• 510 Threaded
• Output Wattage: 5.0 - 177.0W
• Temperature Control: Nickel 200, Titanium, Stainless Steel 316 and TCR Mode
• Temperature Control Range: 200 - 600F / 100 - 315C
• Resistance Range: 0.05 - 5.0ohm
  
• FIT Modes for Sub-Ohm Tanks
• Rounded Corners with Micro-Curve Surface
• 25% Lighter in Weight
• Resin Panel Design
• Zinc Alloy Construction
• Requires (2) High Amp 18650 Batteries (Sold Separately)
• *We recommend an external charger for optimal charging*
• Front Micro USB Charging Port
• Short Circuit Protection
• Overcharge Protection

Please note: Temperature control requires the use of nickel, titanium or stainless coils.

Features and Specs for VooPoo UFORCE T2 Tank:

• Dimensions: 2-1/16" x 15/16" (Including Drip Tip and Threads)
  
• Diameter: 28mm
  
• 510 Threaded
  
• E-Liquid Capacity: 5.0ml
  
• Retractable Top Fill Design
• Bubble Glass Tank
• Stainless Steel Construction
  
• Triple Airflow Slots
  
• Bottom Adjustable Airflow Control Valve
• Resin Wide Bore Drip Tip
  
• Utilizes UFORCE OCC Atomizer Heads for Wattage Mode
• Includes (1) UFORCE U2 Dual Coil 0.4ohm Atomizer Head (Pre-installed) (40 - 80W)
• Includes (1) UFORCE N3 Triple Mesh Coil 0.2ohm Atomizer Head (65 - 100W)

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.