Home > Coming Soon... >

New!  Vandy Vape Pulse X BF with Pulse X BF Kit
Vandy Vape Pulse X BF Squonk Kit


 

Stock Status:Out Of Stock
Availability: Coming Soon

Sold individually unless otherwise stated. See package contents below
Due to regulations, we are unable to ship E-Liquid into the state of Indiana.
:
VNV-PLX20
Qty:

Description
 
Vandy Vape Pulse X BF Squonk Mod with Pulse X BF RDA - Designed in Collaboration with Tony B.

More information coming soon.

Quick Links:
Our Premium e-Liquid
Wick, Wire and Tools

Features and Specs for Vandy Vape Pulse X BF Mod:

  • Designed by Tony B.
  • Powered by Vandy Chip
  • Bottom Feeding Design
  • Juice Delivery System
  • 8.0ml Capacity Squonk Bottle (Pre-installed)
  • Dimensions: 82mm x 56mm x 28mm (Without Tank)
  • 510 Threaded with Leak Resistant Design
  • Wattage Range: 5.0 - 90.0W
  • Variable Temperature Control : Nickel 200 / Titanium / Stainless Steel / TCR
  • Temperature Control Range: 200 - 600F / 100 - 315C
  • Resistance Range: 0.05 - 1.5ohm for Temperature Control Mode
  • Resistance Range: 0.05 - 3.0ohm for Variable Wattage
  • Bypass Mode
  • Voltage Mode
  • OLED Display Screen
  • Removable Magnetic Front and Back Panels
  • Translucent Colored Panels
  • Requires (1) High Amp 18650, 20700, or 21700 Battery (Sold Separately)
  • Includes 18650 Battery Adapter Sleeve
  • Micro USB Charging Port
  • Open Circuit Protection
  • Short Circuit Protection
  • Overcurrent Protection
  • Low Battery Warning
Please note: Temperature control requires the use of nickel, titanium, or stainless steel coils.

Features and Specs for Vandy Vape Pulse X BF RDA:

  • Designed in Collaboration with Tony B.
  • Dimensions: 25.5mm x 24mm (Including Drip Tip and Threads)
  • 24mm Diameter
  • Gold Plated 510 Contact Pin
  • 2.0ml e-Liquid Capacity
  • X-Shaped Build Deck Design with Four Post Holes
  • Supports Vertical and Horizontal Coil Builds
  • Top Squonk Feeding Action Design
  • Bottom Juice Return Design
  • Grid Airflow Design
  • Adjustable Airflow Top Cap
  • 810 Wide Bore Resin Drip Tip
  • Includes Stainless Cap
  • Includes PC Frosted Cap
  • Includes Bottom Feeding Squonker Pin for Squonk/Bottom Feeding Mods (Pre-installed)
  • Includes 510 Drip Tip Adapter
  • Includes Coil Lead Guide

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

Package Contents:
  • 1 x Vandy Vape Pulse X BF Mod
    1 x Vandy Vape Pulse X BF RDA
    1 x 8.0ml Squonk Bottle
    1 x 18650 Battery Adapter Sleeve
    1 x PC Frosted Cap
    1 x Coil Lead Guide
    1 x 510 Drip Tip Adapter
    1 x Screwdriver
    1 x Set of Spare Parts
    1 x QC USB Cable

Share your knowledge of this product with other customers... Be the first to write a review and receive a promo code!

Browse for more products in the same category as this item:

Coming Soon...