Home >

VAMO7 35W - Gun Metal
VAMO 35 Watt - Gun Metal MOD APV

Images are for illustration purposes only. Actual color, finish and packaging may vary.

List Price: $74.95
Our Price: $64.95

Price with Selected Options: $64.95

Stock Status:Out Of Stock
Availability: Discontinued
Product Code: ZVAM35-GM




Featured e-Liquids

Featured Nicotine Salt e-Liquids


Description Warnings

  • Variable wattage: Set the preferred wattage (from 7 to 35 watts)
  • 510/Ego Threaded
  • For use with single rechargeable IMR 18650 high amp battery. This device is not compatible with protected batteries.
  • Atomizer resistance check
  • Battery Life Indicator
  • OLED Screen
  • Vented Tailcap
  • Adjustable Contact Pin


  • 18650 mode: 5-1/2"L x 7/8"D

  • Atomizers at 0.4ohm or less, the screen will display LO Ω, which indicates that you need to use a new atomizer at higher resistance.
  • Atomizer short circuit the screen will display LO v.
  • Incorrect battery installation protection. The device will not work circuits will be protected.
  • Minimum resistance 0.5 Ω
  • Thermal Monitoring
  • Correct Polarity Signaling
  • Heavy Duty Micro-switches
  • Vent Hole in Battery End Cap
  • Battery End Cap �fail safe� designed to �give way�

Package Contents:
  • 1 x VAMO7 35W

Average Customer Review: 2 of 5 Total Reviews: 6 Write a review

  0 of 0 people found the following review helpful:
Temperature control issues January 19, 2015
Reviewer: Aaron B from Berkeley, CA  
I wrote out a long review but was told by the website that it had to be 1,000 characters, so I'll keep it short.

(1) The gun metal *will* wear off quickly.

(2) The temperature control problems destroy the device's usefulness.

On the latter, I've tested the Vamo7 with a variety of tanks and ohm builds (Aspire Atlantis, Kanger Subtank, Plume Veil RDA). It says "too hot" after between 1 and 5 hits no matter what you put on it.

I also have a DNA 30 mod as a comparison. It *never* says "too hot" with any of the above tanks. The only tank/build my DNA 30 had issues with was a Billow RTA dual coil build at 0.4 ohms. It started getting "too hot" after 3-5 hits.

But with other mods, the "too hot" screen is an exception. With the Vamo7, it is the rule. It is constant. It will destroy your vaping experience regardless of your tank or setup.

This is an emphatic *DO NOT BUY.*

Was this review helpful to you?

  0 of 0 people found the following review helpful:
worst purchase ever made. January 16, 2015
Reviewer: christian decker from loveland, CO United States  
It says "too hot" every other time I touch it even when I'm outside in the snow says it when I haven't touched it in hours it turns off on its own it tell me there is atomized issues when there's not the button sticks the finish is already half worn off to the bare metal and its not even a week old I would really like to return or exchange it out for a different product or I won't be purchasing from here again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Vamo 7 January 16, 2015
Reviewer: Anonymous Person from Browndale, PA United States  
Piece of crap. The first one I recieved I hit the fire button and it shut off about 8 different times, then when i finally got it to stay on, I go to hit the fire button and the TOO HOT would come up on the screen. So i had to email the MVS and tell them of the problem because they don't have a phone number for someone to call.They  sent me a label to send the vamo 7 back so i did. I recieved my replacement yesterday and guess what the same thing TOO HOT on the screen. I am using the kanger subtank and a kanger evod glass. Tried tank on different mod's and no problem. So i email the problem again today we'll see what happen's next. I don't want a replacement

Was this review helpful to you?

  0 of 1 people found the following review helpful:
vamo body January 9, 2015
Reviewer: Tommy Wright from Lexington, OK United States  
Be aware that the body of the Vamo units is cast hard pewter not maleable metal. The gun metal and chrome are hot dipped coatings on this metal.

The good is my Vamo is still working after 3.5 years but has cracks in the body and no coating whatsoever.. Also very heaving large compared to newer mod units

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Vamo7 January 5, 2015
Reviewer: Marion Cook from Carrollton, GA United States  
Works good but finish wore off within first week.  Looks crazy now.  It works good nice vapor and easy to use. Other than the finish wearing off I and happy with it I guess.

Was this review helpful to you?

View All Customer Reviews