Home >

Twisted Messes RDA² (Squared) - Stainless
Twisted Messes RDA 2 (Squared) Jay bo Design


 
Images are for illustration purposes only. Actual color, finish and packaging may vary.



Price: $69.99

Stock Status:Out Of Stock

Sold individually unless otherwise stated. See package contents below
Due to regulations, we are unable to ship E-Liquid into the state of Indiana.
:
TWM-R210
Qty:

Description
 
Twisted Messes RDA² (Squared) designed in collaboration with Jay Bo

Following the great success of the original Twisted Messes RDA, partnered with the famous Jay Bo, they have now introduced the Twisted Messes Squared. The original Twisted messes featured massive, intricate builds, earning the name, Twisted Messes! The Twisted Messes Squared improves upon this design. This RDA features four large 2.8mm post holes and square posts for ease of use. It is almost close to the velocity styled build deck! A sleek, clean design, followed by ease of use and square adjustable airflow, you can not go wrong. This RDA is easy to build on even with new users due to the design of their deck. The split-post design allows for a dramatic increase in coil installation versatility. With this design, they somehow allowed a 5.5mm deep juice well on a 22mm RDA! Thus, allowing space for massive builds!

Included in the kit is a replacement drip tip made of an all new material, Radel Polyphenylsulfone. Radel is heat resistant in temperatures up to 207C. It is also impact resistant, chemical resistant, flame retardant and withstands over 1,000 cycles of steam sterilization without any significant loss of properties. This would be the only drip tip you need!

The Twisted Messes RDA² (TMSquared) features a two-post design with 4 individual post holes. Each post hole is 2.8mm in diameter accommodating any build you can throw at it.

The split-post design allows for a dramatic increase in coil installation versatility.

Check out our Wick, Wire and Tools section below:

http://www.myvaporstore.com/Wick-Wire-s/164.htm

Features and Specs:

  • Dimensions: 1-5/8" x 7/8" (Including Tip and Threads)
  • 22mm Diameter
  • 510 Threaded
  • Split post design allowing coil installation into the center, far sides or via the standard method.
  • Negative post milled into the deck
  • Four individual 2.8mm post holes
  • Clamp style posts with flat bottomed screws for better connection (thanks to JayBo)
  • 5.5mm juice well
  • Stainless Steel construction throughout the RDA (except contact pin)
  • Black Radel Drip Tip, a high-temperature plastic with a slightly lower melting point than PEEK
  • Hex-Driver and Hex Screws included
  • Square air-holes, cut via electricity
  • All PEEK insulators
  • Gold plated brass contact pin
  • Three 3x3mm adjustable square air-holes, with a single coil airflow option on the inner barrel (smallest option is one air-hole open, in both single and dual mode)

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Package Contents:
  • 1 x Twisted Messes RDA² (Squared)
    1 x Hex-Driver
    1 x Set of Hex Screws
    1 x Set of O-rings
    1 x Black Radel Drip Tip
    1 x 510 Drip Tip Adapter
    1 x Spare AFC Ring

Average Customer Review: 4.5 of 5 Total Reviews: 15 Write a review, get a promo code!

  0 of 0 people found the following review helpful:
 
twisted messed v2 rda October 15, 2017
Reviewer: Barry ingold from woodland hills, CA United States  
This is my favorite rda to date!!!!!
Dont hesitate on getting yours.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Finally a good build deck. March 20, 2017
Reviewer: Matt from MI, United States  
I bought this rda because I always end up chipping/melting the paint off other rda's, and wanted a stainless steel one. This unit comes with a black outer ring you can use and I decided to give it a shot. The finish has remained scratch/chip free and is very high quality. The deck has perfect post placement too, allowing for large guage coils and parallel builds without issue.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great dripper minus a couple issues June 21, 2016
Reviewer: Nick from United States  
I like everything about this dripper from the looks to the ease of building and depth of the juice well. My only issues are that it can be very tricky to drip without removing the entire top cap - which isn't too hard but not exactly ideal for me as juice will tend to seep down and drip through the bottom of the deck when removing the entire top cap to drip. The other issue is that because of the airflow ring setup, over time juice will condense between the two layers so you may feel some juice seeping around the edges of the airflow slots.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
My new favorite May 21, 2016
Reviewer: Russ T from Royersford, PA United States  
Out of all my rda's this going to be the most used. A friend with the TM v1 told me how much he loved his so when I seen the "squared" I figured I'd give it a go and definitely have no regrets. My vapor store is the best for pricing and shipping. They're the only place I'll order mods, tanks and rda's from.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Fast May 12, 2016
Reviewer: Anonymous Person  
I love the customer service, and I received my order quickly.

Was this review helpful to you?

View All Customer Reviews