Home >

ThinkVape MKL 200 TC Mod - Stainless
Think Vape MKL 200 Temperature Control Mod - Stainless

Images are for illustration purposes only. Actual color, finish and packaging may vary.

Price: $57.99

Stock Status:Out Of Stock

Sold individually unless otherwise stated. See package contents below
Due to regulations, we are unable to ship E-Liquid into the state of Indiana.




Featured e-Liquids


ThinkVape MKL 200 Temperature Control Mod
ST 200 Chip

The ThinkVape MKL 200 is a powerful temperature control mod that is sure to stand out among the crowd due to it's eye catching appearance and design. The ThinkVape MKL 200 utilizes the ST 200 Chip which allows you to fire up to 200 watts and supports Nickel 200, Titanium and Stainless Steel wire in temperature control mode. The MKL 200 features a 0.91" OLED horizontal display screen that may be placed in stealth mode. The ThinkVape MKL 200 features a ergonomic oversized fire button that is both comfortable and easy to use. The MKL 200 features a distinct zinc alloy construction is both lightweight and durable. The MKL 200 requires (2) high amp 18650 batteries (sold separately) that is easily replaced using the slide out battery door cover located on the bottom.

Features and Specs:

  • Utilizes the ST 200 Chip
  • Dimensions: 3-7/16" x 2" x 1"
  • 510 Threaded
  • Wattage Output: 5.0 - 200.0W
  • Temperature Control Mode: Nickel (Ni200), Titanium (Ti) and Stainless Steel (SS)
  • Temperature Control Range: 93 to 315C / 200 to 600F
  • Resistance Range for Wattage: 0.1 - 3.0ohm
  • Resistance Range for TC Mode: 0.05 - 1.0ohm
  • 0.91" OLED Display Screen
  • Stealth mode
  • Ergonomic Oversized Fire Button
  • Zinc Alloy
  • Requires (2) High Amp 18650 Batteries (Sold Separately)
  • *External charger recommended for optimal charging speeds*
  • Micro USB Charging Port (2.0A)
  • Slide Out Battery Door Cover
  • Low Voltage Protection
  • Low Resistance Protection
  • Short Circuit Protection
  • High Temperature Protection
  • Reverse Battery Protection
Please note: Temperature control requires the use of nickel, titanium or stainless coils.

NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.

This device should only be used with rechargeable Lithium Ion IMR batteries with an amp limit of 20A. Using other batteries can be potentially hazardous.

This device will include a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
Package Contents:
  • 1 x ThinkVape MKL 200 TC Mod
    1 x Micro USB Cable

Average Customer Review: 4.5 of 5 Total Reviews: 4 Write a review, get a promo code!

  0 of 0 people found the following review helpful:
Good mod but lacks features August 14, 2017
Reviewer: Anonymous Person from Waipahu, HI United States  
Three things going for this mod, build quality,looks and it hits hard. But no tcr, ohm lock or ramp up. SS temp control not working, set it at 200w at 600F and it hit like 3 ohm pen. Not sure about Ni or Ti I don't use those.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
ThinkVape MKL 200 July 24, 2017
Reviewer: Adam from North bergen, NJ United States  
Excellent fit and finish classy looking mod. Lightweight and bright screen.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Nice overall July 24, 2017
Reviewer: Dave Burke from Castleton, NY United States  
Fit and finish are really good, no rattle, gaps or any other little things that we usually have to overlook. Electronically it reads resistance accurately and power seems to be spot on, however SS temp control does not work at all and when the mod goes into standby there is a significant delay before it fires for the first time. All in, I don't regret buying the mod at all and would recommend it. As always service was fast and worry free. Would like to see some more higher end stuff though.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
What the ... July 7, 2017
Reviewer: YBC from Vapetasia  
It doesn't have TCR no ramp up control no power curve no off no ohms lock or adjustment no flip screen ... but why do I like it so much. This thing looks cool in person and it HITS HARD. Button press is solid battery door is smooth and solid. It's retro cool. Could use a drop in price bc it lacks those features but it HITS HARD. Not as big as I thought conformable to hold and fit and finish is top notch. It's one of those things that despite it all you like it. Did I mention it HITS HARD.

Was this review helpful to you?