Snowwolf VFENG Dual Squonk Starter Kit - 18650, 20700, 21700 Battery Compatible
The Snowwolf VFENG Squonk Starter Kit is a revolutionary dual squonk mod which features a 3.0ml capacity squonk bottle on each side of the Snowwolf VFENG Squonk mod. This allows you to fill each squonk bottle with a different e-liquid to mix and match flavors for maximum pleasure. The VFENG Squonk features a bottom feeding design with a juice delivery system that allows you to simply squeeze the squonk bottles to saturate your squonk capable RDA. The VFENG Squonk can fire up to 120 watts and is powered by (1) high amp 18650, 20700, or 21700 battery (sold separately). An 18650 battery adapter sleeve is included as well. The included Snowwolf Squonk RDA is squonk ready and features a 510 bottom feeding contact pin. The Squonk RDA features a unique four post build deck design with integrated post holes. The Squonk RDA features dual airflow slots that may be adjusted by the adjustable airflow top cap.
Our Premium E-Liquid
Wick, Wire and Tools
Features and Specs for Snowwolf VFENG Squonk Mod:
Please note: Temperature control requires the use of nickel, titanium, or stainless steel coils.
- Dimensions: 3-3/4" x 1-7/8" x 1-9/16"
- Bottom Feeding Design
- Juice Delivery System
- Utilizes Dual Squonk Bottles to Mix and Match Flavors
- 3.0ml Capacity Squonk Bottle
- 510 Threaded
- Operating Wattage: 10.0 - 120.0W
- Voltage Input 3.2 - 4.2V
- Voltage Output: 1.0 - 7.5V
- Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 304, 316, 317 (SS), TCR
- Temperature Range: 100 - 300C / 212 - 572F
- Resistance Range: 0.05 - 3.0ohm
- 1.3" TFT Color Display Screen
- Zinc Alloy Construction
- Requires (1) High Amp 18650, 20700 or 21700 Batteries (Sold Separately)
- Includes 18650 Battery Adapter Sleeve (Pre-installed)
- Micro USB Charging Port
Features and Specs for Snowwolf Squonk RDA:
- Dimensions: 1-5/8" x 1-1/16" (Including Drip Tip and Threads)
- 27mm Diameter
- 510 Bottom Feeding Contact Pin (Pre-installed)
- Four Post Build Deck Design with Integrated Post Holes
- Steel and Aluminum Construction
- Adjustable Airflow Top Cap
- Dual Side Airflow Slots
- Ultra Wide Bore Drip Tip
atomizer: The user of this atomizer must install wick and wire (coil) in
order to use it. This atomizer is not pre-installed with coil.
Installation is required. Wick, wire and mesh sold separately.
Rebuildable atomizer coils and wicks have known risks.
are for experts, not average or beginner vapers with no multimeter or
knowledge of how to use a meter, or when a meter must be used, or how
electronic devices work. These materials cannot safely be used by the
inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Tips for new nicotine users:
Sub-ohm or low resistance atomizers produce a higher throat hit than standard/high resistance
atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.
For standard/high resistance atomizers or restrictive devices (ex. pod
based/pen), we recommend recommend 6mg or higher due to the mouth to
lung (MTL) design of this atomizer/tank. Preference may vary depending
on the user and frequency of use.
Warning: Sub ohm or low resistance tanks should only be used by
experienced users. Extra safety precautions should be practiced when
using a sub ohm tank. This tank will only work on a mechanical mod or a
regulated mod capable of firing sub ohm atomizers and coils. For
example, if you have a 0.2ohm coil, your mod must be able to fire
atomizers of 0.2ohm or lower. You must also ensure that your
batteries can handle sub ohm atomizers and coils. If you're using a
regulated mod, make sure it can handle the amps. Improper use can lead
to injury or damage. For mechanical mod users, please use 20 Amp
batteries or higher. Use the
OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Battery Safety Warning:
caution when using Li-ion cells, they are very sensitive to charging
characteristics and may explode or burn if mishandled. Make sure you
have enough knowledge of Li-Ion rechargeable batteries in charging,
discharging and assembly before use.
Do not let your batteries
come into contact with metal objects such as keys, loose change or any
other metal objects. Doing so will put you at risk for short circuiting
your battery and explosion. Do not put loose batteries in your pocket,
purse, bag or anywhere else. When the battery is not in use, you must
store it in a plastic battery case to reduce the risk of a battery explosion.
Always charge in/on a fire-proof surface. Never leave charging batteries unattended.
Do not modify batteries or chargers in any shape or form.
use Lithium Ion rechargeable batteries in devices that have a built in
protection circuit board (PCB) that detect shorts, over-discharge,
over-charging etc. Use of lithium ion batteries without a PCB may
increase your risk or explosion an/or fire.
Store your batteries away from the sun and heat to prevent overheating your batteries.
be sure to inspect your battery before use to ensure it is not damaged
including tears/rips in the battery wrap. Discontinue use immediately if
battery is damaged.
Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.
This product will include a 30 day Limited Warranty against any
manufacturing defects from the date of delivery. Scratches and
discoloration from regular use is considered normal wear and tear and is
not covered by warranty.
myvaporstore.com will not be held
responsible or liable for any injury, damage, or defect, permanent or
temporary that may be caused by the improper use of a LI-ION battery.
Please have a basic understanding of the batteries you are using and how
to care for them properly.
- 1 x Snowwolf VFENG Squonk Mod
1 x Snowwolf Squonk RDA
1 x 18650 Battery Adapter Sleeve (Pre-installed)
1 x Replacement Squonk Pin
1 x Allen Key
1 x Set of Spare Screws and O-Rings