Home >

SMOKTech ZMAX Mini & Extension - Green
SMOKTech ZMAX Mini & Extension


 
Images are for illustration purposes only. Actual color, finish and packaging may vary.



Price: $81.27
Our Price: $59.95


Stock Status:Out Of Stock
Availability: DISCONTINUED

Sold individually unless otherwise stated. See package contents below
Due to regulations, we are unable to ship E-Liquid into the state of Indiana.
:
ZMAXM-R2GR

Batteries


Charger


Tank



DISCONTINUED  
Description
 
SMOKTech ZMAX Mini & Extension Tube

The ZMAX takes vaping to the next level. This is really a variable power mod because you have the option of adjusting either your voltage or your power (watts). The ZMAX adjusts from 3.0 to 6.0 Volts in 0.1 volt increments or 3.0 to 15 Watts in 0.5 Watt increments.

Maximum output of 4 Amps
Blue LED
Dimensions:
3-3/4"L x 7/8"D

4-7/8"L x 7/8"D (with extension tube)

The ZMAX can read your output voltage, battery voltage and cartomizer / atomizer resistance. This APV does it all.

In addition, the ZMAX has a native eGo style connector that allows you to use both 510 and Joye eGo cartomizers, atomizers and tanks without adapters. The ZMAX does not have outside eGo threads but typical eGo style parts fit flush down into the recess that is around the ZMAX connector. 510 Tanks and other similar 510 items will screw in and be almost flush with the top.

The ZMAX Mini fits a flat top 18350 or 18650 battery (with the use of the included extension tube) with the maximum dimension of 66mm x 18mm. The ZMAX should only be used with IMR LiMn batteries. This device is not compatible with protected batteries.

All adjustments and settings are made with the push button switch. This includes a setting to turn your ZMax off for safe travel in your pocket, bag or purse.

The ZMax includes an instruction manual in English.

Menu:

1. Uu- Voltage up: Increase voltage or wattage output
2. Ud- Voltage down: Decrease voltage or wattage output
3. So- Standby On/Off: Lock or unlock the device to prevent accidental discharge when stored in pocket or purse
4. Uc- Battery voltage check: Display the remaining charge/voltage on the battery (fully charged battery reads 4.1v-4.2v)
5. Ds- Display change: Set the LCD to display the information you would like to see when the device is in use.
  • dR - Resistance of attached cartomizer or atomizer
  • do - Current voltage or wattage output
  • du - Battery voltage (remaining charge)
6. Lo- LCD on/off - Turn the LCD screen on or off while in use
7. Up- Switch to variable volts or variable watts output
  • Po- Constant power operation (Variable Wattage)
  • Uo- Constant voltage operation (Variable Voltage)

8. NR (New in Revision 2) - Switch between RMS or MEAN output mode

  • RnS- RMS output mode (New in Rev. 2)
  • NEA- MEAN output mode (Standard in Rev. 1)

Error codes:

LOR---Lower resistance indication; If the resistance is below 1.2ohm,the display will show "Low Load".
LOU---Lower voltage indication. If the battery voltage is below, the display will show "Low Voltage".
WSC---Short circuit indication. If cartomizer/atomizer output port short-circuit, the display will show "Warning Short Circuit".
Low Battery Indicator --- When the battery gets low the red lighted pushbutton will slowly flash indicating that your battery is low.
Package Contents:
  • 1 x SMOKTech ZMAX Mini
  • 1 x Extension Tube (for 18650 batteries)

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review, get a promo code!

  1 of 1 people found the following review helpful:
 
ZMAX March 24, 2015
Reviewer: Alex from NJ  
ZMAX is very reliable mode. MVS business is strong. I use it for more then three years. Thanks.


Was this review helpful to you?