Home > New Arrivals >

SMOK RPM80 RGC RBA COIL
SMOK RPM80 RGC RBA COIL


 
List Price: $14.99
Our Price: $11.99

Stock Status:Out Of Stock
Product Code: SM-RPP40
Qty:

Description Warnings
 
SMOK RPM80 RGC RBA Head (Rebuildable Atomizer Head)

Rebuildable Atomizer Head for the SMOK RPM80/PRO Pod System Starter Kit

Features and Specs:

  • Designed for the SMOK RPM80/PRO Pod System
  • Larger Heating Area
  • Balanced Flavor and Dense Vapor
  • Includes (1) Prebuilt Single Coil 0.6ohm
  • Includes 510 Adapter
  • Includes Screwdriver and Spare Parts

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

Package Contents:
  • 1 x SMOK RGC RBA Coil
    4 x Sealing Ring
    1 x Screwdriver
    1 x 510 Adapter
    4 x Screw

Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 8 Write a review

  0 of 0 people found the following review helpful:
 
5 of 5 Works as expected/intended (maybe better?) July 28, 2020
Reviewer: Aaron H from PA United States  
I've yet to try many builds in this as of yet, but, it does what I was hoping, and works better than I thought it would in a way, just due to the small size.
If you have the patience to build this tiny little sucker, it's amazing to say the least. (For pods at least)
Highly recommended if you have a fetch or any of the other compatible devices! (patience is almost a must)

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Exelent! June 5, 2020
Reviewer: Jay McElroy from EVERETT, WA United States  
This is my first time getting back into vaping
In a long time. I needed to switch again because smoking was killing me

This little RBA for my RPM 80 with RGC Pod
Kicks butt! Now I just wish it had a bit more space on the build deck other then that its a great little RBA! And makes for great flavor too


Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
4 of 5 Works good but the post holes are backwards. May 21, 2020
Reviewer: Vapey Vapurton from Woodside, NY United States  
I made:
- 3x32g + 40g N80 Aliens
- 3x31g + 38g SS Aliens
- 2x32g + 2x.2 ribbon + 40g N80 Fraliens
- 2x30g + 40g 2 core SS Aliens
And the couple I've tried work great. I haven't tried anything beefier yet but one of these days I'll see if I can fit 28 gauge Aliens or 28g/.3 Fraliens or something. The post holes are small, but you could drill/file them out a tiny bit bigger.
Speaking of the post holes, they're backwards to how I usually wrap coils. The left post hole is higher meaning you should wrap your coils with the wire going under the bit instead of over. Otherwise easy to build and wick. Works fine.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Just as expected May 18, 2020
Reviewer: william lawens from olivet, MI United States  
Typical RBA. How it works depends on your experience level with building an RBA coil and cotton.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
4 of 5 Rgc rba May 15, 2020
Reviewer: Junius Craig from Silver Spring, MD United States  
Not bad after you get a decent coil in it and master the wicking.

Was this review helpful to you?

View All Customer Reviews