SMOKTech G-Priv 2 Luxe Edition 230W Touchscreen with TFV12 Prince Tank
The SMOK G-PRIV 2 LUXE Edition Starter Kit presents a luxurious exterior upgrade to the cutting-edge G PRIV 2 system, delivering a visually-striking prismatic frame and Cobra resin battery cover to pair with the premiere tank in the industry, TFV12 Prince Sub-Ohm Tank. A high-end iteration to an already impressive device, the G-PRIV 2 LUXE Edition features a more upscale plating in a wide array of new colors options for a stunning impression. The structure maintains a classic vertical-based design with sharp angular lines centered around the large 2" OLED Colorful Touch Screen. The resolution implements an updated IPS 200PPI for sharper image qualities and enriches the user navigation experience. Each kit is paired with the new SMOK TFV12 Prince Tank, presenting a maximum capacity of 8 milliliters, new button-lock hinged top-fill, smooth dual bottom airflow control, and the versatile TFV12 Prince Coil System. Infusing the absolute latest in vape output technology while adding a high-end construction and finish, the SMOK G PRIV 2 LUXE Edition 230 Starter Kit is destined to be the most desirable showcase of the year.
This starter kit requires (2) high amp 18650 batteries (sold separately) and may be charged via the micro USB port. We recommend an external charger (sold separately) for optimal charging.
Our Premium e-Liquid
Replacement Atomizer Heads
TFV12 Prince RBA Head
Features and Specs for SMOK G-Priv 2 Mod:
Please note: Temperature control requires the use of nickel, titanium or stainless coils.
- LUXE Edition
- Dimensions: 3-5/16" x 2" x 1-1/16" (Without Tank)
- Dual High-Amp 18650 Battery - Not Included
- Wattage Output Range: 1-230W
- Min Atomizer Resistance: 0.06ohm
- Temperature Range: 200-600F
- Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
- Superior Zinc Alloy Construction
- Super Large 2" OLED Touch Screen - Shatter Resistance
- Screen-Lock Button - Simplify Operation
- Five Drawing Effects: Min, Max, Soft, Normal, Hard
- Temperature Coefficient of Resistance (TCR) Adjustments
- User-Friendly Interface
- Stealth Firing Bar Mechanism
- Magnetized Battery Cover - Cobra Resin Inlay
- Temperature Protection
- Short Circuit Protection
- Over Current Protection
- Over/Under Voltage Protection
- MicroUSB Port
- 510 Connection
Features and Specs for SMOK TFV12 Prince Tank:
- Dimensions: 2-7/16" x 15/16" (Including Drip Tip and Threads)
- 25mm Base Diameter
- 5mL Standard Juice Capacity
- 8mL Maximum Juice Capacity - Convex Glass Extension
- Superior Stainless Steel Construction
- High-Grade Glass Reinforcement
- High-Temperature Resistant - Explosion Proof
- Convenient Top-Fill Rotary Design - Lock Button Mechanism
- Massive Dual Adjustable Airflow Control at Base
- 810 Cobra Resin Ultra-Wide Drip Tip
- Performance-Grade V12 Prince Coil Structure
- 0.12ohm V12 Prince-T10 Decuple Coils - rated for 60-120W
- 0.4ohm V12 Prince-Q4 Quadruple Coils - rated for 40-100W
- 510 Connection
Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.
For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.
Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Battery Safety Warning:
Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.
Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.
Always charge in or on a fire-proof surface. Never leave charging batteries unattended.
Do not modify batteries or chargers in any shape or form.
Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.
Store your batteries away from the sun and heat to prevent overheating your batteries.
Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.
Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.
myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.