Innokin Kroma-A Mod with iSub-B Plex3D Tank Starter Kit

The Innokin Kroma-A Starter Kit is the next generation upgrade of the popular Kroma Starter Kit. This starter kit features the sleek and compact Innokin Kroma-A Mod paired up with the iSub-B Tank. The Innokin Kroma-A has been redesigned and removes the recessed design of the original and replaces it with the more traditional 510 connector. The Kroma-A features a upgraded flush 510 connector that comfortably fits 24mm and smaller diameter tanks.

The Innokin Kroma-A features a built-in 2000mAh battery that can fire up to 75 watts. The Kroma-A supports Nickel 200, Titanium and Stainless Steel 316 wire in temperature control mode using the AETHON TC chipset found in other popular Innokin devices. The Kroma-A features the 'Vape while Charging' technology which allows you to vape as you recharge your device using the included micro USB cable.

The Innokin iSub-B Sub-Ohm Tank is the first Innokin iSub tank to be powered by the new advanced iSub Plex3D coil atomizer heads which utilizes a new 3D mesh design with uses less power to deliver bigger flavor and vapor production. The new iSub Plex3D coil features special micro-grooves that are cut across to create a larger surface area and can rapidly heat up and cool down faster than your standard atomizer head which helps extend the life of your coil. Cotton and wood pulp wicking is used to improve the flow of e-Liquid and to boost the flavor of your favorite e-Liquid flavor. The iSub-B features an anti-flood system which automatically activates a fill-shield to help minimize flooding when refilling your tank. The iSub-B features a 3.0ml e-Liquid capacity inside of a rainbow tinted glass tank which may be refilled using the top fill design. The iSub-B includes (2) iSub Plex3D 0.35ohm atomizer heads.

Quick Links:
Our Premium e-Liquid
Replacement Atomizer Heads

Features and Specs for Innokin Kroma-A Mod:

• Dimensions: 2-11/16" x 1-3/4" x 15/16"
• Comfortably Fits 24mm and Smaller Tanks
• AETHON Temperature Control Chipset
• 510 Threaded
• Battery Capacity: Built-in 2000mAh Battery
• Operating Wattage: 6.0 - 75.0 W
• Temperature Control: Nickel (Ni200), Titanium (Ti), Stainless Steel 316 (SS316)
• Temperature Range: 150 - 315C / 300 - 600F
• Minimum Resistance: 0.1ohm
• Recommend Resistance for TC Mode: Ni200 (0.1 - 0.2ohm), Ti (0.1 - 0.5ohm), SS316L (0.2 - 1.0ohm)
• OLED Display Screen
• 5V/2A Micro USB Fast Charge
• Vape While Charging Technology
• Precision Temperature Control
• Flip Screen Orientation
• Precise Reading: Resistance / Volts / Puff Counter

Please note: Temperature control requires the use of nickel, titanium, or stainless steel coils.

Features and Specs for Innokin iSub-B Tank:

• Dimensions: 1-15/16" x 15/16" (Including Drip Tip and Threads)
• Diameter: 24mm
• 510 Threaded
• E-Liquid Capacity: 3.0ml (4.0ml with Replacement Bubble Glass)
• Top Fill Design with Twist Off Cap
• Rainbow Tinted Glass Tank
• Stainless Steel Construction
• Anti-Flood System
• Precision Four Airflow Hole Design
• Bottom Adjustable Airflow Control Valve
• 510 Resin Wide Bore Drip Tip
• Compatible with Innokin iSub Atomizer Heads
• Utilizes iSub Plex3D Mesh Coil with Cotton and Wood Pulp Atomizer Heads
• Includes (2) iSub Plex3D 0.35ohm Atomizer Heads (Pre-installed) (30 - 55W)
• 510 Drip Tip Compatible

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.