Innokin Adept Mod with Zlide MTL Tank Starter Kit

The Innokin Adept Vape Mod is designed for mouth to lung users looking for a large built-in battery capacity and dependability. The Adept features a rugged box mod that is designed to be water, shock, and dust resistant for the ultimate outdoors vaping experience. The Adept features a durable rubberized finish that is soft to the touch and comfortable to hold. The Adept features an intelligent auto wattage design which automatically detects the resistance of the coil and sets the wattage range accordingly. The Adept features a large built-in 3000mAh battery capacity and may be charged via the micro USB charging port which is sealed tight with a silicone plug.

The Innokin Zlide Vape Tank designed by Phil Busardo and Dimitris Agrafiotis builds upon the Innokin Zenith with new user requested improvements and changes. The riser has been removed so a wide variety of drip tips will now match the Zlide tank. The Zlide also now features a replaceable glass section. The Zlide is compatible with the original Zenith atomizer head along with a new Z-PLEX3D mesh coil atomizer head for incredible flavor and vapor production. The new next generation Z-PLEX3D mesh coil features increased warmth, coil life, and even more flavor. The Zlide features a convenient retractable top fill design which is secured by the drip tip lock system.

Quick Links:
Our Premium e-Liquid
Replacement Atomizer Heads

Features and Specs for Innokin Adept Mod:

• Designed in Collaboration with Phil Busardo and Dimitris Agrafiotis
• Shock Resistant
• Water Resistant
• Dust Resistant
• Dimensions: 3-1/4" x 1-9/16" x 1-1/8" (Without Tank)
• Spring Loaded 510 Contact Pin
• Built-in Battery Capacity: 3000mAh
• Intelligent Auto Wattage
• Higher than 1.0ohm Coil: 11 - 14W
• Lower than 1.0ohm Coil: 14 - 17W
• Resistance Range: 0.4 - 3.0ohm
• Ergonomic Design
• Durable Soft-Touch Rubberized Finish
• Tri-Color LED Display Screen
• Micro USB Charging Port with Silicone Seal Plug
• Short Circuit Protection

Features and Specs for Innokin Zlide Tank:

• Designed in Collaboration with Phil Busardo and Dimitris Agrafiotis
• Dimensions: 1-15/16" x 7/8" (Including Drip Tip and Threads)
• Diameter: 22mm
• 510 Threaded
• E-Liquid Capacity: 2.0ml
• Drip Tip Lock System
• Retractable Top Fill Design
• Glass Tank
• Precision Four Airflow Hole Design
• Bottom Adjustable Airflow Control Valve
• Compatible with Innokin Zenith Atomizer Heads
• Utilizes Z-PLEX3D Kanthal Mesh Coil for Flavor Boost
• Includes (1) Zenith Z-PLEX3D Kanthal Mesh Coil 0.48ohm Atomizer Head (Pre-installed) (13 - 16W)
• Includes (1) Zenith Kanthal Coil 1.6ohm Atomizer Head (10 - 14W)

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.