Home > MODS & PVs > Squonker >

Kanger Dripbox 160 Starter Kit - Stainless
Kanger Drip Box 160 Starter Kit


 
Images are for illustration purposes only. Actual color, finish and packaging may vary.



Price: $76.90
Wholesale Price $35.99


Stock Status:Out Of Stock

Sold individually unless otherwise stated. See package contents below
Due to regulations, we are unable to ship E-Liquid into the state of Indiana.
:
KRDB50

Batteries


Charger


Featured e-Liquids


Accessories



Qty:  
Description
 
Kanger Dripbox 160 Temperature Control Starter Kit

Kangertech is back at it again with the updated and more powerful version of the popular Dripbox Kit which is called the Kanger Dripbox 160 Starter Kit. The Dripbox 160 Starter Kit features the same "squonker" design or also known as a bottom feeder to provide a convenient dripper experience without the hassles of dripping. The Dripbox 160 Mod now features a variable wattage output from 7 to 160 watts and also features a temperature control mode which supports Nickel 200, Titanium, Stainless Steel and Ni-chrome wire in temperature control mode. The Subdrip 160 RBA now features a velocity style RBA base for easier and improved builds.

The Subdrip 160 RBA features a juice delivery mechanism at the bottom of the 510 threads which allows e-liquid to saturate the cotton. E-liquid is simply squeezed/refilled using the e-liquid bottle located at the bottom of the device to saturate your cotton and is now ready to be vaped for massive flavor.

The Dripbox 160 Kit features the Subdrip 160 RBA and a Dripbox 160 Mod all together in one convenient kit. The Subdrip 160 RBA supports replaceable 0.2ohm cotton drip coils which are easily replaced or can be rebuilt to your own personal preferences. The Subdrip 160 RBA can also be filled from the top as well. The Dripbox 160 Mod can fire up to 160 watts and has a incredible capacity of 7ml due to the bottom feeding design. The Dripmod 160 requires (2) 18650 High Amp Batteries (sold separately) and features a Micro USB charging port.

The Kanger Dripbox 160 Starter Kit is perfect for vapers looking to get that incredible dripper flavor without the hassles of constantly dripping and redripping.

NOTE: The Subdrip 160 RBA and Dripbox 160 Mod are not compatible with other devices or tanks due to the juice delivery system. Using other types of device or tanks may cause juice to flow down which may damage your device or battery.

Pre-built coils and replacement build decks can be found here:

Replacement Drip Coils

Features and Specs:


  • Dimensions: 4-3/4" x 2" x 1" (Including Subdrip 160 RBA)
  • Includes the Subdrip 160 RBA and Dripbox 160 Mod
  • 22mm Diameter
  • Bottom Feeding Design
  • Juice Delivery System
  • Temperature Control
  • Top-Fill Option
  • Variable Wattage Output: 7.0 - 160.0W
  • Temperature Control : Ni200 / Ti / SS / Ni-Chrome
  • Temperature Control Range: 100 - 315C / 200 - 600F
  • Resistance: 0.05 ohm or above for Ni/ Ti/ SS Wire
  • Resistance: 0.10 ohm or above for Ni-chrome Wire
  • 7ml e-Liquid Capacity
  • Velocity Style Base for Rebuildable Coils
  • Use pre-built 0.2ohm drip coils or build your own
  • Subdrip 160 RBA - Stainless Steel Casing
  • Dripbox 160 - Zinc Alloy Casing
  • Requires (2) 18650 High Amp Batteries (Sold Separately)
  • Micro USB Charging Port
  • *External charger recommended for faster charging speeds*
  • Low Resistance Protection
  • Low Battery Warning Indicator
  • High Temperature Protection
Please note: Temperature control requires the use of nickel, titanium, stainless wire.
Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Package Contents:
  • 1 x Kanger Dripbox 160 Device
    1 x Kanger Subdrip 160 RBA
    1 x Stainless Steel 0.25ohm Drip Coil (Pre-Installed)
    1 x Replacement Kanthal 0.2ohm Drip Coil
    1 x Spare Bottle
    1 x Accessory Pack
    1 x Pad of Cotton
    1 x Micro USB Cable


Average Customer Review: 4.5 of 5 Total Reviews: 61 Write a review, get a promo code!

  0 of 0 people found the following review helpful:
 
Convinient but heavy August 22, 2018
Reviewer: Ken Bryan Mar from San Jose, CA United States  
Vaping is good, but the weight is pretty heavy for a regular 2 battery mods and squank. bottom feeder leaks over time, rda included is just fine.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Nice October 9, 2017
Reviewer: Abraham Rodriguez from Seguin, TX United States  
I got it for the squonk function but it's really nice that you can still use it as a tank mod

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Awesome! September 11, 2017
Reviewer: Jamie W from Hamilton, OH United States  
So far to date, I love kangertech products. Haven't had a issue out of any I have bought so far. Have yet to be disappointed.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
GREAT MOD but... September 5, 2017
Reviewer: Dustin Brown from Waianae, HI United States  
I have a little issue with 2 screw holes on the inside of the battery compartment where there was little sharp barbs around the rim left there while being machined i guess. It ended up slicing 2 battery wrap when I tried to remove the batteries. I ended up having to get an xacto knife and slice the small barbs off and sand around the area to make it smooth. Other then that its a great squonking mod. Simple menu system. The RDA imo is underrated, I watched a few reviews about the Dropbox 160 before purchasing and thought the RDA would suck but once rebuilt with coils at the proper height it chucks clouds and flavor is great. For $42 shipped its a great deal.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Not bad for price but August 28, 2017
Reviewer: Christopher Davitte from Marietta, GA United States  
Good for the price but has issues.

Buy some battery sleeves. Taking batteries out will damage the sleeving over a short period of time.

Some atomizers the chip will recognize the ohm and others you will have a had time getting to read.

Have noticed the the ohm's meter is out by about .02 reading from ohm meter and using another mod. If I had it all to do again.

Think would spend a little more and get a Geekvape S100.  


Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

MODS & PVs > Squonker
Brands > Kangertech > Dripbox
New Arrivals
MODS & PVs
Brands
Brands > Kangertech
Starter Kits
Shop Starter Kits
Rebuildable Drip Atomizers (RDA)
MODS & PVs > Dual Battery
MODS & PVs > 100W - 350W Devices
Accessories