Home >

Kanger DRIP EZ
Kanger DRIP EZ Starter Kit Kit


 
Images are for illustration purposes only. Actual color, finish and packaging may vary.



List Price: $55.99
Our Price: $45.99

Availability: DISCONTINUED
Product Code: KRDB90

Color



DISCONTINUED  
Description Warnings
 
Kangertech DRIP EZ Kit

Kangertech is here to introduce a very unique product named the DRIP EZ Kit. The DRIP EZ features a e-liquid pump which is placed on top of the included bottle. A tube connects directly from the pump to the DRIP EZ RBA which allows e-Liquid to be delivered directly into your cotton. The concept is very similar to the "squonker" style kits such as the Dripbox. One difference is that the DRIP EZ mod may be used with any other 510 threaded tank. The DRIP EZ mod features a variable wattage output from 5 to 80 watts and also supports Nickel 200, Titanium and Stainless Steel wire in temperature control mode. The DRIP EZ mod requires (1) 18650 high amp battery (sold separately) and features a Micro USB charging port.

E-liquid is simply refilled using the e-liquid pump to saturate your cotton and is now ready to be vaped for massive flavor. The DRIP EZ RBA features a screwless two post deck for easier and improved builds. You may press down on the posts to release and change your coils. No need to hassle yourself with screws anymore due to this screwless design. The DRIP EZ supports replaceable 0.2ohm cotton kanthal drip coils which are easily replaced or can be rebuilt to your own personal preferences.

Pre-built coils and replacement build decks can be found here:

Replacement Drip Coils

Features and Specs:


  • Dimensions: 5" x 2-1/4" x 1-3/16" (Including Drip EZ RBA)
  • Includes the Drip EZ RBA and Drip EZ Mod
  • 22mm Diameter
  • 510 Threaded
  • Unique Juice Pump Delivery System
  • Replaceable Bottle
  • Temperature Control
  • Variable Wattage Output: 5.0 - 80.0W
  • Temperature Control : Ni200 / Ti / SS
  • Temperature Control Range: 100 - 315C / 200 - 600F
  • Resistance Range: 0.1 - 2.5ohm
  • Two Post Deck
  • Unique Screwless Clamp Post Design
  • Press Down on Posts to Change Coils
  • Use Pre-built Kanthal 0.2ohm drip coils or build your own
  • Adjustable Airflow
  • Zinc Alloy Construction
  • Requires (1) 18650 High Amp Battery (Sold Separately)
  • Micro USB Charging Port
  • Low Resistance Protection
  • Low Battery Warning Indicator
  • High Temperature Protection
Please note: Temperature control requires the use of nickel, titanium, stainless wire.
Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Package Contents:
  • 1 x Kangertech DRIPEZ
  • 1 x Drip EZ RBA Preinstalled Kanthal 0.3ohm Coil
  • 1 x Replacement Drip Coil 0.2ohm
  • 1 x Spare Juice Pump
  • 2 x Prebuilt Coils
  • 1 x Micro USB Cable

Average Customer Review: 3 of 5 Total Reviews: 22 Write a review

  1 of 1 people found the following review helpful:
 
Kanger Drip EZ November 1, 2017
Reviewer: Jeff Prather from Hazelwood, MO United States  
Works well, between the two covers,glass and stainless,I use the stainless,the glass is a little loose and eliquid will keep out,no problems with the other,Vapes really well, the design could be better, watched a video and same scenario,but works as suggested,good for the beginner for dripper,not a bad mod really,I'm now looking into a bottom feed squonk box,I think it will be better for me,thanks

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Garbage!!!!!!! October 18, 2017
Reviewer: Harvey Hays from Aransas Pass, TX United States  
Leaks like a sieve, Had to jump on Youtube to learn how to get it turned on did I mention its leaks, I just need to hold it and I will get all the nicotine I need, Look at a different one


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Garbage!!!!!!! Don't buy This October 16, 2017
Reviewer: Harvey Hays from Aransas Pass, TX United States  
Leaks like a sieve, Had to jump on Youtube to learn how to get it turned on did I mention its leaks, I just need to hold it and I will get all the nicotine I need, Look at a different one


Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Great Vape July 28, 2017
Reviewer: M from 01854, MA United States  
Great vape, very cool looking. Only thing that is an immediate flaw is the tube from the juice to the chamber. Brought it out the first night i had it and it broke. Three days later, the replacement one is already starting to break, so I will have to cut it shorter past the break and keep going with that. Thats my only flaw so far, other than that great. I will probably purchase on my own a reinforced tube so it wont break so easily nex ttime.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Love this!! March 7, 2017
Reviewer: Chelsea Brines from Oxford, KS United States  
This is the coolest thing ever! I have NOOOOOO problems at all with mine!

Was this review helpful to you?

View All Customer Reviews