Joyetech Cuboid 200 Triple 18650 TC Firmware Upgradeable Mod
The Joyetech Cuboid 200 TC Mod improves upon the original and popular Cuboid by increasing the wattage power and adding preheat functionality in a newly redesigned slim shape. The Cuboid 200 now requires (3) 18650 high amp batteries (sold separately) to power this device. The Joyetech Cuboid 200 uses the Variable Temperature Control system with firmware V6.04 which includes Titanium, Nickel, and Stainless Steel 316 in TC Mode and customized TCR available now.
The Joyetech Cuboid 200 features stainless steel 510 threads and a wide border which matches quite nicely with larger sized tanks. This device features a clear and large 0.96" OLED display screen with custom logo functionality. The micro USB port may be used for future firmware updates to ensure your device is always updated with the latest and newest features.
Quick Links: High Amp 18650 Batteries External Battery Charger Premium E-Liquid
Features and Specs:
- Dimensions: 3-7/8" x 2-7/16" x 7/8"
- Stainless Steel 510 Threads
- Temperature Control: Nickel, Titanium, Stainless Steel 316 and TCR Mode
- Output Wattage: 1-200W
- Temperature Control Range: 100 - 315C / 200 - 600F
- Resistance Range: 0.05-1.5ohm for Variable Temperature Mode
- Resistance Range: 0.1-3.5ohm for Variable Wattage Mode
- Preheat Function
- Custom Logo
- Clear and Large 0.96" OLED Display Screen
- Zinc Alloy Construction
- Requires (3) 18650 High Amp Batteries (Sold Separately)
- **We recommend an external charger for optimal charging**
- Micro USB Port for Firmware Updates and Charging
- Upgradable Firmware
- Dual Circuit Protection
- Reverse Battery Polarity Protection
Please note: Temperature control requires the use of nickel, titanium or stainless wire.
Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.
For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.
Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Battery Safety Warning:
Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.
Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.
Always charge in or on a fire-proof surface. Never leave charging batteries unattended.
Do not modify batteries or chargers in any shape or form.
Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.
Store your batteries away from the sun and heat to prevent overheating your batteries.
Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.
Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.
myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
|