Joye eVic Basic Starter Kit

The Joye eVic Basic Starter Kit features the ultra portable Joye eVic Basic device paired up with the Cubis Pro Mini. The Joye eVic Basic can fire up to 40 watts and supports temperature control modes. The Variable Temperature Control system can now offer support for Nickel (Ni), Titanium (Ti), and Stainless Steel 316 (SS316) coils. The eVic Basic also features Bypass and Temperature Coefficient of Resistance (TCR) modes.

The eVic Basic features a clear OLED display screen which supports custom logos. The eVic Basic features a real time clock display which presents the current time in either dial or numerical display mode. The eVic Basic features a dual circuit protection which applies over-charging, over-current, and over-discharging protections. This device may be charged and also download future firmware updates via the micro USB port.

The Joye Cubis Pro Mini Sub-Ohm tank is the miniature version of the original Cubis Pro. The Joye Cubis Pro Mini utilizes the same innovative and leak resistant cup design while adding many new changes and quality of life improvements. The Cubis Pro Mini features the top fill and top airflow (TFTA) technology for improved airflow and convenience. The Cubis Pro Mini can also be easily disassembled for simple and convenient cleaning. The Cubis Pro Mini also supports the original Cubis atomizer heads such as the BF SS316L, BF Clapton, BF Ni200 and BF NotchCoil atomizer heads which can be purchased based on your own personal vaping preferences. The Cubis Pro is the perfect complement to the Joye eVic Basic due to the matching assorted colors and size.

Quick Links:
Premium Salt Based e-Liquids
Premium e-Liquid
Replacement Cubis Atomizer Heads

Features and Specs for eVic Basic Device:

• Dimensions: 2-1/8" x 1-1/4" x 7/8"
• 510 Threaded
• Built-In 1500mAh Battery
• Wattage Output: 1.0 - 40.00w
• Variable Temperature Control : Nickel / Titanium / Stainless Steel 316/ TCR
• Temperature Control Range: 100 - 315C / 200 - 600F
• Bypass (Direct Output Voltage) Mode
• Resistance Range: 0.05-1.5ohm for Variable Temperature Control Mode
• Resistance Range: 0.1-3.5ohm for Variable Wattage and Bypass Mode
• OLED Display Screen
• Custom Logo
• Real Time Clock Display
• Micro USB Charging Port
• New V4.02 Firmware
• Upgradeable Firmware
• Dual Circuit Protection
• Over-charging Protection
• Over-current Protection
• Over-discharging Protection

Please note: Temperature control requires the use of nickel, titanium, stainless wire.

Features and Specs for Cubis Pro Mini:

• Dimensions: 1-7/8" x 7/8" (Including Drip Tip and Threads)
• 22mm Diameter
• 2ml e-Liquid Capacity
• 510 Threaded
• Top Fill Design
• Innovative Cup Design
• Top Adjustable Airflow Valve
• Increased e-Liquid Capacity
• Compatible with the Original Cubis Atomizer Heads
• Includes (1) BF SS316L 0.5ohm DL Atomizer Head for Variable Wattage or SS316L TC Mode
• Includes (1) LVC Clapton 1.5ohm MTL Atomizer Head for Variable Wattage
• Removable Insulated Drip Tip
• Fully Detachable and Washable

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.