Joyetech Cuboid Lite with Exceed D22 Starter Kit

The Joyetech Cuboid Lite features a portable and sleek looking device with a built-in high capacity 3000mAh battery. The Cuboid Lite features a large 1.45" TFT color display screen which is larger than most full sized mod displays. The Cuboid Lite can fire up to 80 watts and supports nickel, titanium, stainless steel 316 and TCR modes in temperature control mode. The user interface has been redesigned for your convenience and ease of use. The Cuboid Pro also features bypass, preheat, stealth and real time clock functions. The Cuboid Lite features a micro USB port for both charging and future firmware updates.

The Exceed D22 features a slim 22mm diameter with a 2.0ml e-Liquid capacity which may be expanded to 3.5ml using the included expansion glass tube. The Exceed D22 features a top fill design with a twist off cap. The Exceed D22 is designed for mouth to lung (MTL) and direct lung (DL) users due to the two different airflow designs. The Exceed D22 features a standard airflow slot and three airflow holes which may be adjusted due to your vaping preferences. The Exceed D22 utilizes Exceed EX NiChrome (NiCr) atomizer heads for variable wattage. This tank includes (1) Exceed EX 1.2ohm MTL Atomizer Head (8 - 14W) and (1) Exceed EX 0.5ohm DL Atomizer Head (20 - 35W).

Quick Links:
Our Premium E-Liquid
Replacement Atomizer Heads

Features and Specs for Cuboid Lite Mod:

• Dimensions: 2-5/8"x 1-9/16" x 1" (Without Tank)
• Comfortably Fits 25mm and Smaller Tanks
• Spring Loaded 510 Contact Pin
• New Flexible 510 Contact Pin (4mm to 5.5mm)
• Temperature Control: Nickel, Titanium, Stainless Steel 316 and TCR Mode
• Output Wattage: 1.0 - 80.0W
• Temperature Control Range: 100 - 315C / 200 - 600F
• Resistance Range: 0.05 - 1.5ohm for Variable Temperature Mode
• Resistance Range: 0.1 - 3.5ohm for Variable Wattage
• Built-in 3000mAh Battery
• Bypass Mode
• Preheat Function
• Stealth Function
• Adjustable Timeout Duration
• Real Time Clock - Digital / Analog
• 1.45" TFT Color Display Screen
• Micro USB Port for Firmware Updates and Charging
• Maximum Charging Current: 2A
• Atomizer Short Circuit Protection
• Weak Battery Alert
• Low Power Alert
• Atomizer Low Alert
• Reverse Polarity Protection

Features and Specs for Exceed D22 Tank:

• Dimensions: 1-5/8" x 13/16" (Including Drip Tip and Threads)
• 22mm Diameter
• 510 Threaded
• 2.0ml e-Liquid Capacity (3.5ml with Included Expansion Glass Tube)
• Top Fill Design with Twist Off Cap
• Designed for Both Mouth to Lung (MTL) and Direct Lung (DL)
• Choose from Two Different Airflow Designs - Slot or Three Airholes
• Adjustable Airflow Control Valve
• Utilizes Joyetech Exceed EX NiChrome Atomizer Heads for Variable Wattage
• Includes (1) Exceed EX 1.2ohm MTL Atomizer Head (8 - 14W)
• Includes (1) Exceed EX 0.5ohm DL Atomizer Head (20 - 35W)
• 510 Drip Tip Compatible

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.