Innokin Oceanus 20700 Mod with Scion Sub-Ohm Tank Starter Kit
The Innokin Oceanus Starter Kit features the slim and sleek Oceanus Mod and the Scion Sub-Ohm Tank. The Oceanus is designed to be a simple yet powerful device capable of firing up to 110 watts. The Oceanus is powered by a single 20700 battery and is supported by the AETHON chipset found in other popular Innokin devices. The Oceanus is capable of wattage, voltage and bypass modes depending on your personal preferences and vaping lifestyle. The Oceanus features a special MODP setting that can be enabled to provide a 20% power boost for the first two seconds to reach your desired wattage quicker and more efficiently. The Innokin Oceanus features the famous vape while charging technology found in other Innokin devices and can be charged at a fast 2A charge rate via the micro USB port.
The Scion Sub-Ohm Tank
is Innokin's first high wattage tank. The Scion is designed for vapers
looking for a balance between flavor and vapor production. The Scion
works great with high powered devices such as the Innokin MVP4.
The Innokin Scion features a 3.5ml e-Liquid capacity in a sleek and
compact design. The Scion features a convenient top fill design that is
easy to use. The Scion features dual airflow slots that may be
adjustable down to your personal preferences. The Innokin Scion utilizes
Scion Kanthal BVC (Bottom Vertical Coil) atomizer heads for variable
wattage. Available in two different variations, the Scion features a
triple vertical 0.5ohm coil design and a single parallel vertical
0.28ohm coil design (sold separately). The Scion RTA Head - Dual Post Velocity Build Deck is also included as well for vapers that prefer to build their own coils.
Please make your battery charger is compatible and will fit 20700 sized batteries. (2) Ampking 20700 30 Amp 3000mAh Batteries are included with the purchase of the Innokin Oceanus Starter Kit.
Replacement Atomizer Heads
Features and Specs for Innokin Oceanus:
Features and Specs for Innokin Scion Sub-Ohm Tank:
- AETHON Chipset
- Dimensions: 3-7/16" x 1-9/16" x 15/16"
- 510 Threaded
- Operating Wattage: 6.0 - 110.0 W
- Minimum Resistance: 0.1ohm
- Maximum Working Current: 31.5A
- Maximum Output Voltage: 7.5V
- Wattage, Voltage and Bypass Modes
- MODP Setting - 20% Power Boost for First 2 Seconds
- OLED Display Screen
- Flip Screen Orientation
- Requires (1) High Amp 20700 Battery
- Includes (2) Ampking 20700 30 Amp 3000mAh Batteries
- Vape While Charging Technology
- Charged via Micro USB 5V/2A
- Dimensions: 2-1/8" x 15/16" (Including Drip Tip and Threads)
- Diameter: 24mm
- 510 Threaded
- 3.5ml e-Liquid Capacity
- Convenient Top Fill Design
- Sleek and Compact Design
- Glass Tank
- Stainless Steel Construction
- Dual Airflow Slots
- Adjustable Airflow Control Valve
- Wide Bore Delrin Drip Tip
- Utilizes Innokin Scion Kanthal BVC (Bottom Vertical Coil) Atomizer Heads for Variable Wattage
- Includes (1) Scion Kanthal Triple BVC 0.5ohm Atomizer Head (70 - 110W)
- Includes Scion RTA Head - Dual Post Velocity Style Build Deck
- Includes Prebuilt Coils and Cotton
Rebuildable atomizer: The user of this atomizer must install wick
and wire (coil) in order to use it. This atomizer is not pre-installed
with coil. Installation is required. Wick, wire and mesh sold
Rebuildable atomizer coils and wicks have known risks.
are for experts, not average or beginner vapers with no multimeter or
knowledge of how to use a meter, or when a meter must be used, or how
electronic devices work. These materials cannot safely be used by the
inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.
For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.
Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Battery Safety Warning:
Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.
Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.
Always charge in or on a fire-proof surface. Never leave charging batteries unattended.
Do not modify batteries or chargers in any shape or form.
Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.
Store your batteries away from the sun and heat to prevent overheating your batteries.
Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.
Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.
myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.