Eleaf iStick Pico Dual with Melo 3 Mini Starter Kit
The Eleaf iStick Pico Dual Starter Kit features the Eleaf iStick Pico Dual Mod and the Melo 3 Mini Sub-Ohm Tank in a compact yet powerful starter kit. The Eleaf iStick Pico Dual combines your favorite features from the iStick and Pico into a powerful 200 watt dual battery device. The Eleaf iStick Pico Dual features temperature control modes that are compatible with Nickel, Titanium, and Stainless Steel 316 wire. Temperature Coefficient of Resistance (TCR) mode and preheat functionality are also featured as well.
The Eleaf iStick Pico Dual features four switchable display interfaces on a OLED display screen catered to your personal preferences. The Eleaf iStick Pico Dual is also upgradeable via firmware upgrades and may be charged via the included QC USB cable. The Eleaf iStick Pico Dual utilizes (2) high amp 18650 batteries (sold separately). Batteries are easily removed and replaced using the flip-open battery cover located on the bottom of device. The Eleaf iStick Pico Dual has the ability to become a power bank when utilizing the included RC adapter. The RC adapter converts your 510 connection into a USB output which allows you to recharge any rechargeable USB device such as your phone.
The Eleaf Melo 3 Mini is the perfect tank to complement the iStick Pico due to it's small size. The Melo 3 Mini features a eliquid capacity of 2.0ml. The Eleaf Melo 3 Mini is remarkably easy to refill due to the top-fill feature. The Eleaf Melo 3 Mini features an invisible adjustable airflow control valve for great amounts of vapor production. The Melo 3 Mini features a sturdy and beautiful 304 Stainless Steel construction with a glass tank. When used with the 100% pure cotton Eleaf EC Kanthal/TC-Nickel/EC TC-Titanium atomizer heads, the Eleaf Melo 3 Mini features an amazing vaping experience when paired up with the iStick Pico Dual.
Please note, the Eleaf iStick Pico Dual requires (2) High Amp 18650 Batteries (Sold Separately). All batteries must be the same brand and model. Discharge and recharge the batteries together for maximum efficiency. We recommend an external charger for optimal charging (Sold Separately).
Replacement Atomizer Heads
Our Premium e-Liquid
Features and Specs for iStick Pico Dual Mod:
Features and Specs for Melo 3 Mini:
- Dimensions: 2-15/16" x 1-13/16" x 1-11/16"
- 510 Threaded
- Comfortably Fits 25mm and Smaller Tanks
- Operating Wattage: 1 - 200 W
- Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Modes
- Temperature Control: 100 - 315C / 200 - 600 F
- Bypass (Direct Output Voltage) Mode
- Resistance: 0.1 – 3.5 ohm in Variable Wattage/Bypass Mode
- Resistance: 0.05 - 1.5 ohm in Temperature Control mode
- OLED Display Screen
- Preheat Functionality
- New Power Bank Feature
- Includes Reverse Charging (RC) Adapter for Rechargable USB Devices
- Ventilation Holes for Improved Heat Dissipation
- Hidden Adjustment Buttons located on the Bottom of the Device
- Firmware Upgradeable
- New Balanced Trickle Charge System
- Requires (2) High Amp 18650 Batteries (Sold separately)
- Micro USB Charging Port (Micro USB Cable included)
- *External charger recommended for faster charging speeds*
- Dual Circuit Protection
- Reverse Polarity Protection
Please note: Temperature control requires the use of nickel, titanium, or stainless steel coils.
- Dimensions: 2-1/4" x 7/8" (Including Drip Tip and Threads)
- 22mm Diameter
- 510 Threaded
- 2.0ml liquid Capacity
- 304 Stainless Steel Construction
- Glass Tank
- Invisible Adjustable Airflow Control Valve
- Convenient Top-Fill Feature
- 100% Pure Cotton Atomizer Heads
- Uses Eleaf EC, EC-TC Nickel, or EC-TC Titanium Atomizer heads
Tip for new users:
We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm
atomizers produce higher throat hit than low and standard resistance
atomizers. Using this atomizer with a nicotine level above 6mg will
usually taste burnt or harsh.
Warning: This tank uses a sub-ohm resistance atomizer. It will
only work on a mechanical mod or a mod capable of firing an atomizer of
0.3ohm or lower. You must be sure that your mod AND batteries can handle
SUB OHM coils. If you're using a regulated mod, make sure it can handle
the amps. For mechanical mod users, please use 20 Amp batteries or
higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any
questions please contact us by email.
NOTE: Use special caution when
working with Li-ion cells, they are very sensitive to charging
characteristics and may explode or burn if mishandled. Make sure the
user has enough knowledge of Li-Ion rechargeable batteries in charging,
discharging and assembly before use. Always charge in/on a fire-proof
surface. Never leave charging batteries unattended. We are not
responsible for damage if there is any modification of the
batteries/chargers in any form or shape (including pack making). We are
not responsible for any damage caused by misuse or mishandling of Li-Ion
batteries and chargers. We only recommend using Lithium Ion
rechargeable batteries with a control circuit (protection PCB) to assure
safe charge, discharge, etc, use of lithium ion batteries without a
protection circuit is potentially hazardous
This product will include a 30 day Limited Warranty against any
manufacturing defects from the date of delivery. Scratches and
discoloration from regular use is considered normal wear and tear and is
not covered by warranty.
myvaporstore.com will not be held
responsible or liable for any injury, damage, or defect, permanent or
temporary that may be caused by the improper use of a LI-ION battery.
Please have a basic understanding of the batteries you are using and how
to care for them properly.
- 1 x Eleaf iStick Pico Dual Mod
1 x Eleaf Melo 3 Mini Tank
1 x Eleaf EC Kanthal 0.3 ohm Atomizer head (Preinstalled)
1 x Eleaf EC Kanthal 0.5 ohm Atomizer Head
1 x Spare Bag of O-rings
1 x QC USB Cable
1 x RC Adapter