Eleaf iStick Pico 75W Mod

Eleaf which is the manufacturer of the original iStick series, is happy to introduce the Eleaf iStick Pico 75W TC device. The iStick Pico 75W TC which stands for Preferable, Innovative, Compact and Outstanding (PICO) offers an incredible vaping experience at a portable and convenient size. Building upon the Eleaf iStick 60W TC, the upgraded Eleaf iStick Pico 75W not only delivers a satisfying amount of vapor at a 75W maximum output, but it also comes with the smart technology of temperature control supporting both Nickel 200 (Ni200), Titanium (Ti), and Stainless Steel 316 (SS316) coils. The Eleaf iStick Pico 75W also features Bypass and Temperature Coefficient of Resistance (TCR) modes.

The iStick Pico 75W features a device that easily fits in the palm of your hand with the ability to replace and switch out your batteries. The iStick Pico 75W requires (1) high amp 18650 battery (sold separately) which is easily replaceable with the conveniently placed battery cap located right next to the contact pin. The iStick Pico 75W is currently available in five different colors such as Black, White, Silver, Hot Pink and Grey to match your own personal preference.

Note: Only 7/8" (22mm) tanks are compatible with the iStick Pico due to the battery cap.

Features and Specs:

• Dimensions: 2-3/4" x 1-3/4" x 7/8"
• 510 Threaded
• Operating Wattage: 1.0 to 75.0 W
• Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Modes
• Temperature Control: 100-315 ° C / 200-600 ° F
• Bypass (Direct Output Voltage) Mode
• Resistance: 0.1 – 3.5 ohm in Variable Wattage/Bypass Mode
• Resistance: 0.05 - 1.5 ohm in Temperature Control mode
• OLED Display Screen
• Requires (1) High Amp 18650 battery (Sold separately)
• *External charger recommended for faster charging speeds*
• Ventilation Holes for Improved Heat Dissipation
• Adjustment Buttons located on the Bottom of the Device
• Atomizer Protection
• Atomizer Low Alert
• Weak Battery Alert
• Low Voltage Protection
• Temperature Protection
• Temperature Alert
• Short Circuit/No Atomizer Protection

Please note: Temperature control requires the use of nickel, titanium, or stainless steel coils.

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.