Joyetech Cuboid Tap with ProCore Aries Starter Kit
The Joyetech Cuboid Tap Starter Kit is a unique touchpad temperature control mod. The Cuboid Tap utilizes TAPTECH technology which features touchpad fire and adjustment buttons. The Cuboid Tap features a pressure sensitive touchpad system which provides vibration feedback. The Cuboid Tap is a dual 18650 battery mod that fires up to 228 watts and supports nickel, titanium and stainless steel 316 in temperature control mode. The Cuboid Tap also has a bypass mode, preheat function and stealth function as well. The Cuboid Tap features a comfortable and lightweight chassis designed for an all day vaping experience. The Cuboid Tap requires (2) high amp 18650 batteries (sold separately) and may be charged at an improved 2.0A rate using the included QC USB cable.
The ProCore Aries Sub-Ohm Tank is a well balanced tank designed for mouth to lung and direct lung users. The ProCore Aries uses a convenient flip open top fill design for easy and secure refills. The ProCore Aries features dual adjustable airflow slots for increased vapor production. This tank includes (1) ProC1 0.4ohm atomizer head and (1) ProC4 0.15ohm atomizer head which are designed for a direct lung vaping experience. The ProCore Aries is designed to have a well balanced production of flavor and vapor that is sure to please both beginners and veterans.
Replacement Atomizer Heads
Features and Specs for Cuboid Tap:
Features and Specs for ProCore Aries:
- Utilizes Joyetech TAPTECH Technology
- Pressure Sensitive System and Vibration Motor Feedback
- Dimensions: 3-3/8" x 1-5/8"x 1-1/8"
- Comfortably Fits 25mm and Smaller Tanks
- Spring Loaded 510 Contact Pin
- Temperature Control: Nickel, Titanium, Stainless Steel 316 and TCR Mode
- Output Wattage: 1 - 228W
- Temperature Control Range: 100 - 315C / 200 - 600F
- Resistance Range: 0.05 - 1.5ohm for Variable Temperature Mode
- Resistance Range: 0.1 - 3.5ohm for Variable Wattage and Bypass Mode
- Bypass Mode
- Preheat Function
- Custom Logo
- Real Time Clock
- Stealth Function
- 1.3" OLED Display Screen
- Requires (2) High Amp 18650 Batteries (Sold separately)
- *External charger recommended for Optimal Charging*
- Micro USB Port for Firmware Updates and Charging
- Maximum Charging Current: 2A
- Flip Open Battery Door Cover
- Upgradeable Firmware
- Dual Circuit Protection
- Dimensions: 2" x 1" (Including Drip Tip and Threads)
- 25mm Diameter
- 510 Threaded
- 4.0ml e-Liquid Capacity
- Flip Open Top Fill Design
- Dual Airflow Slots
- Adjustable Airflow Control Valve
- Airflow Design Allows for a Balance of Flavor and Vapor
- Utilizes Joyetech ProC Series Kanthal Atomizer Heads for Variable Wattage
- Includes (1) ProC1 0.4ohm Dual Coil Atomizer Head for Direct Lung (DL) (40 - 80W)
- Includes (1) ProC4 0.15ohm Octuple Coil Atomizer Head for Direct Lung (DL) (50 - 110W)
Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.
For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.
Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Battery Safety Warning:
Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.
Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.
Always charge in or on a fire-proof surface. Never leave charging batteries unattended.
Do not modify batteries or chargers in any shape or form.
Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.
Store your batteries away from the sun and heat to prevent overheating your batteries.
Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.
Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.
myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.