Home > MODS & PVs > 100W - 350W Devices >

AvidVape Throne Squonker with Throne RDA Kit
AvidVape Throne Squonker with Throne RDA Kit


 
Images are for illustration purposes only. Actual color, finish and packaging may vary.



Price: $54.99


Sold individually unless otherwise stated. See package contents below
Due to regulations, we are unable to ship E-Liquid into the state of Indiana.
:
AVD-THR10

Color
Click to view another Color


Batteries


Charger


Featured e-Liquids


Wicks


Wire


Accessories



Coil Master 521 Mini Tab [Add $15.99]

Chubby Gorilla Unicorn Bottle 30ml - Blue [Add $1.95]

Chubby Gorilla Battery Case - Black - 2 Slot [Add $1.25]

Coil Master Coiling Kit V4 [Add $11.99]

Coil Master DIY Kit V3 [Add $43.99]

GeekVape Mini Tool Kit [Add $22.99]

Ceramic Vape Tweezers - Black [Add $5.50]

Qty:  
Description
 
AvidVape Throne Squonker Mod with Throne RDA Kit

The AvidVape Throne Squonker Kit features a bottom feeding design with a 8.0ml capacity juice delivery system. Simply squeeze the squonk bottle located inside the Throne Squonker into the included bottom feeding Throne RDA for pure flavor and satisfaction. The Throne Squonker can fire up to 200 watts and supports nickel 200, titanium, and stainless steel temperature control modes. The Throne Squonker also features bypass and VPC modes as well. The Throne Squonker features a large 0.96" TFT color display screen with a detailed operating interface. The Throne Squonker is powered by (2) high amp 18650 batteries which may be charged via the micro USB charging port.

Quick Links:
Our Premium e-Liquid
Wick, Wire and Tools

Features and Specs for AvidVape Throne Squonker Mod:

  • Bottom Feeding Design
  • Juice Delivery System
  • 8.0ml Capacity Squonk Bottle (Pre-installed)
  • Dimensions: 3-1/4" x 1-7/8" x 1-5/8" (Without Tank)
  • 510 Threaded
  • Wattage Range: 5.0 - 200.0W
  • Variable Temperature Control : Nickel 200 / Titanium / Stainless Steel
  • Temperature Control Range: 200 - 600F / 100 - 315C
  • Resistance Range: 0.05 - 3.0ohm
  • Bypass Mode
  • VPC mode
  • 0.96" TFT Color Display Screen
  • Zinc Alloy and Aluminum Alloy Construction
  • Requires (2) High Amp 18650 Batteries (Sold Separately)
  • *External charger recommended for optimal charging speeds*
  • Micro USB Charging Port
Features and Specs for AvidVape Throne RDA:

  • Dimensions: 1-7/16" x 15/16" (Including Drip Tip and Threads)
  • 24mm Diameter
  • 510 Bottom Feeding Contact Pin
  • Four Post Hole Build Deck for Varied Coil Builds
  • Deep Juice Well
  • Dual Airflow Slots
  • Adjustable Airflow Top Cap
  • Stainless Steel Construction
  • 810 Wide Bore Drip Tip
  • Includes 510 Black Delrin Drip Tip
  • Includes 510 Drip Tip Adapter

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it

Package Contents:
  • 1 x AvidVape Throne Squonker Mod
    1 x AvidVape Throne RDA
    1 x Replacement Squonk Bottle
    1 x 510 Black Delrin Drip Tip
    1 x 510 Drip Tip Adapter
    1 x Micro USB Cable
    1 x Set of Spare Parts
    1 x Screwdriver

Average Customer Review: 4 of 5 Total Reviews: 4 Write a review, get a promo code!

  0 of 0 people found the following review helpful:
 
Bad buy August 15, 2018
Reviewer: Cameron Beckman from chowchilla, CA United States  
When the mod arrived I noticed some screws were loose and wouldn't tighten but there unimportant screws. Fast forward a couple of weeks and now the main body screws are shot and the fire button no longer "clicks" also reads short on all my atties

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great kit for the price. August 13, 2018
Reviewer: joshua from IL United States  
The mod is nicely made and works well.  The screen is small but legible.  The buttons work great, but there is minor rattle.  I wish you could change out your bottle without removing the batteries, but that is a minor flaw.  There are also no + or - markings on the battery door, making it hard to tell what way to insert the batteries without looking inside, but that is easily fixable with a sharpie.  The mod fires fast and hits hard at the 60-100 watt range.  I haven't used it at higher or lower wattages.  The coils that come with it have much to be desired as they take forever to fire up, but using other coils, it's much better.  The RDA is nice but feels a little cheap, and the airflow is very hard to adjust.  The bottle isn't one of the soft, silicon ones, but it's workable.  The stem that goes into the bottle is much beefier than similar squonk devices I have seen.  One of the better dual battery squonkers on the market, I would recommend it over others for the price alone.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
AvidVape Throne squonker kit July 8, 2018
Reviewer: Ron from Milford, OH United States  
The Throne squonker kit is great bang for your buck!!
Made very well, light weight but solid. One of the best 18650 squonkers out there.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Pretty good June 25, 2018
Reviewer: Phil from Freeport, FL United States  
Looks bigger in the picture than it is. Screen is really small. Small print is bifocal territory! I have had it leak from the tank. Maybe squonked to hard or to long. The door seems like it might not latch but it does. These observations are not deal breakers. Solid heavy feel and a good hand fit. Buttons are fine. Price is right for dual battery with temp control. Didn't use the RDA so can't comment on it. Using Wasp Nano which is great.

Was this review helpful to you?


Browse for more products in the same category as this item:

MODS & PVs > 100W - 350W Devices
MODS & PVs
Brands
New Arrivals
MODS & PVs > Squonker
Starter Kits > Box Mod Starter Kits
Starter Kits
Shop Starter Kits
Brands > AvidVape
MODS & PVs > Dual Battery