Wismec Sinuous P80 with Elabo Mini Sub-Ohm Tank Starter Kit

The Wismec Sinuous P80 is a sleek and portable single 18650 battery temperature control mod. The Sinuous P80 is similar in design and style to the larger Predator 228 mod. The Sinuous P80 features a centered 510 connector which comfortably fits 25mm diameter and smaller tanks. The Sinuous P80 can fire up to 80 watts and is powered by (1) high amp 18650 battery (sold separately). The Wismec Sinuous P80 features temperature control modes that are compatible with Nickel, Titanium, and Stainless Steel 316 wire. Temperature Coefficient of Resistance (TCR), bypass, stealth and preheat functions are available for use as well.

The Wismec Sinuous P80 mod features a hidden side fire button which is both simple and easy to use. The features a 0.96" OLED display screen with a detailed interface. Choose from three different color indicator lights to personalize your device. The Sinuous P80 is also firmware upgradeable and may be charged via the included QC USB cable. Batteries are easily removed and replaced using the flip-open battery cover located on the bottom of device.

The Wismec Elabo Mini Sub-Ohm Tank is the perfect tank to match up with the Wismec Sinuous P80. The 25mm Elabo Mini fits perfectly on the centered 510 connector of the Sinuous P80. The Elabo Mini features a 2.0ml e-Liquid capacity that may be filled from the top. The retractable top fill design allows for easy refills and minimizes leaks. The Elabo Mini utilizes wide dual airflow slots that may be adjusted down to your personal preferences. The Elabo Mini utilizes Wismec Triple and NS Triple atomizer heads designed for variable wattage.

Quick Links:
Our Premium e-Liquid
Replacement Atomizer Heads

Features and Specs for Wismec Sinuous P80 Mod:

• Designed by Sinuous Designs
• Comfortably Fits 25mm and Smaller Tanks
• Dimensions: 3-1/8" x 1-3/8" x 1"
• Spring Loaded 510 Contact Pin
• Centered 510 Connector
• Operating Wattage: 1 - 80W
• Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Modes
• Temperature Control: 100 - 315C / 200 - 600 F
• Resistance: 0.1 – 3.5 ohm in Variable Wattage
• Resistance: 0.05 - 1.5 ohm in Temperature Control Mode
• Bypass Mode
• Preheat Function
• Stealth Function
• Hidden Side Fire Button
• 0.96" OLED Display Screen
• Choose From Three Different Color Indicator Lights
• Requires (1) High Amp 18650 Battery (Sold separately)
• Micro USB Charging Port (QC USB Cable included)
• Maximum Charging Current: 2A
• Firmware Upgradeable
• Dual Circuit Protection
• Reverse Polarity Protection

Please note: Temperature control requires the use of nickel, titanium, or stainless steel coils.

Features and Specs for Elabo Mini Sub-Ohm Tank:

• Dimensions: 1-7/8" x 15/16" (Including Drip Tip and Threads)
• Diameter: 25mm
• 510 Threaded
• 2.0ml e-Liquid Capacity
• Glass Tank
• Retractable Top Fill Design
• Wide Dual Airflow Slots
• Adjustable Airflow Control Valve
• Wismec Triple and NS Triple Atomizer Heads for Variable Wattage
• Includes (2) Wismec WS01 Triple 0.2ohm Atomizer Head (Designed for 40 - 80 Watts)
• 510 Drip Tip Compatible

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.