Vaporesso GEN with SKRR-S Sub-Ohm Tank Starter Kit
The Vaporesso GEN Vape Kit features the lightweight and durable GEN mod powered by the new AXON chip with all new features along with the original OMNI Board chip features. The AXON chip features new modes such as the pulse, power ECO, and smart temperature control modes. The Pulse mode continuously gives you a hit throughout your puff (every 0.02 seconds) giving you even more powerful, flavorful clouds with every puff. The Power ECO mode optimizes the settings of your GEN mod to maximize battery life. The Smart Temperature Control mode will automatically recognize your temperature control coil. The GEN features a soft touch casing with four layers of coating including a scratch resistant coating. The GEN can fire up to 220 watts and supports multiple temperature control settings. The GEN is powered by (2) high amp 18650 batteries (sold separately) which may be replaced using the magnetic battery door panel. The GEN may be charged via the micro USB charging port.
The SKRR-S sub-ohm tank features a huge 8.0ml e-Liquid capacity which may be filled from the top using the locking mechanism. The SKRR-S features a redesigned tank base to minimize leaks. The SKRR-S utilizes a Quadflow (QF) air distribution system for massive airflow and vapor production. The SKRR-S utilizes new QF Strip and Meshed coil atomizer heads with flax fiber and cotton for pure flavor. The SKRR-S is also compatible with the popular Vaporesso GT Core atomizer heads as well.
Quick Links: Our Premium e-Liquid Replacement NRG Atomizer Heads Replacement SKRR Atomizer Heads
Features and Specs for Vaporesso GEN Mod:
- Powered by AXON Chip
- Dimensions: 3-5/8" x 2-1/16" x 15/16" (Without Tank)
- 510 Threaded
- Output Wattage: 5.0 - 220.0W
- Temperature Control : Nickel 200 / Titanium / Stainless Steel
- Temperature Control Range: 100 - 315C / 200 - 600F
- Resistance Range: 0.03 - 5.0ohm
- Pulse Mode
- Power ECO Mode
- Smart Temperature Control Mode
- DIY Modes: VW, VV, VT, Bypass, CCW Modes Available
- Lightweight and Durable Design
- Soft Touch Casing with Four Layers of Coating
- Scratch Resistant Coating
- 0.91" OLED Display Screen
- Requires (2) 18650 High Amp Batteries (Sold Separately)
- *We recommend an external charger for optimal charging*
- Micro USB Charging Port
Please note: Temperature control requires the use of nickel, titanium or stainless coils.
Features and Specs for Vaporesso SKRR-S Tank:
- Dimensions: 2-1/8" x 1" (Including Drip Tip and Threads)
- Diameter: 30mm
- 510 Threaded
- E-Liquid Capacity: 8.0ml
- Top Fill Design
- Bulb Glass Tank
- Redesigned Tank Base to Minimize Leaks
- Triple Airflow Slots
- Bottom Adjustable Airflow Control Valve
- Quadflow (QF) Air Distribution System
- Wide Bore Drip Tip
- Flax Fiber with Cotton
- Compatible with Vaporesso GT Core Atomizer Heads for Wattage
- Includes (1) SKRR QF Meshed Kanthal Coil 0.2ohm Atomizer Head (Pre-installed) (50 - 80W)
- Includes (1) SKRR QF Strip Kanthal Coil 0.15ohm Atomizer Head (50 - 80W)
Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.
For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.
Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Battery Safety Warning:
Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.
Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.
Always charge in or on a fire-proof surface. Never leave charging batteries unattended.
Do not modify batteries or chargers in any shape or form.
Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.
Store your batteries away from the sun and heat to prevent overheating your batteries.
Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.
Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.
myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
|