Sense V-Jet 230W TC Starter Kit

The Sense V-Jet 230W TC Starter Kit is created with perfect balance between high-performance and ergonomic functionality, integrating a S.V.L (Simple Vape Life) chipset with 230W of output to pair with the new V-Jet Sub-Ohm Tank. The V-Jet 230W TC Box Mod is expertly crafted with a modern interface, centered around the full-colored TFT LCD screen with contrasting side panels for a striking masterpiece. The TFT LCD display provides all operational information in an organized manner with Real Time Clock (RTC) integration, furthering ergonomic functionality with a four button interface. The internal SVL chip is highly intelligent, powered by dual 18650 batteries (sold separately) with 230W of maximum power, full temperature suite, and TCR/TFR customization. Pairing with the box mod device is the Sense V-Jet Sub-Ohm Tank, delivering a 4.5mL maximum capacity structure with dual bottom airflow control and the utilization of the new V-Jet Coil System. The coils have an atomizer resistance of 0.4ohm and 0.6ohm, with a recommended wattage range of 40 to 100W. Airflow enters the structure through dual adjustable bottom airflow, providing auxiliary cooling properties while maintaining excellent flavor experience.

This starter kit requires (2) high amp 18650 batteries (sold separately).

Quick Links:
Replacement Atomizer Heads
Our Premium e-Liquid

Features and Specs for Sense V-Jet Mod

• Dual High-Amp 18650 Batteries - Not Included
• Wattage Output Range: 7-230W
• Output Voltage Range: 5-8.5V
• Min Atomizer Resistance: 0.1ohm
• Temperature Range: 200-600F
• Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
• Comprehensive TCR and TFR Adjustments
• High-Quality Zinc Alloy Construction
• Ergonomic Contour - Futuristic Design Elements
• Full-Colored 0.91 Inch TFT LCD Display
• Real Time Clock (RTC) Setting
• Puff Counter
• Four Botton Control - Firing Button, Adjustments, Menu
• Bottom-Loaded Hinged Battery Door Cover
• Short Circuit Protection
• Over Heating Protection
• Timeout Protection
• Low Resistance Protection
• Low Voltage Protection
• MicroUSB Port - Firmware Upgrades
• 510 Connection

Please note: Temperature control requires the use of nickel, titanium or stainless coils.

Features and Specs for Sense V-Jet

• 24.8mm Diameter
• 4.5mL Maximum Juice Capacity
• Superior Stainless Steel Construction
• High-Grade Glass Reinforcement
• Innovative Flip Top-Fill Design with Hinged Lock
• Dual Adjustable Airflow Control at Base
• V-Jet Coil System - Large Single Vertical Structure
• 0.4ohm Kanthal V-Jet Coil - rated for 40-100W
• 0.6ohm Kanthal V-Jet Coil - rated for 40-100W
• 510 Resin Widebore Drip Tip
• 510 Drip Tip Adapter
• Copper-Plated 510 Connection

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.