GeekVape Aegis L200 Classic ( Legend 2) Starter Kit

The GeekVape Aegis Legend 2 (L200) is the updated version of the original Aegis Legend vape mod. The Aegis L200 features a new incredibly durable and lightweight magnesium alloy construction. The Aegis Legend 2 features a colored display screen. The Aegis Legend 2 brings back the rugged style and design with a durable box mod that is designed to be water, shock and dust resistant for the ultimate outdoors vaping experience. The GeekVape Aegis Legend 2 can fire up to 200 watts and supports nickel 200, titanium and stainless steel 316 wire in temperature control mode. The Aegis Legend is powered either with (2) high amp 18650 batteries (sold separately) with the use of the included 18650 battery adapter or with (2) high amp 20700 batteries (sold separately) and may be charged via the Type-C USB charging port. The Aegis L200 Classic Kit is paired with Geekvape's Z Max Sub-ohm tank that utilizes Geekvape's M Series Atomizer heads.

Quick Links:
Our Premium e-Liquid
Replacement Atomizer Heads


Features and Specs for GeekVape Aegis Legend Mod:

• Dimensions: 140.05mm x 54.12mm x 29mm
• Shock Resistant
• Water Resistant - IP67 Rating
• Dust Resistant - IP67 Rating
• Gold Plated 510 Contact Pin
• Output Wattage: 5.0 - 200.0W
• Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Mode
• Temperature Control: 100 - 315C / 200 - 600 F
• Resistance Range: 0.05 - 3.00ohm
• Bypass Mode
• Stealth Mode
• Colored Display Screen
• New Lightweight Magnesium Alloy Construction
• Requires (2) High Amp 18650/20700 Batteries (Sold Separately)
• *We recommend an external charger for optimal charging*
  
• Bottom Battery Door Cover with Lock
  
• Type-C USB Charging Port

Please note: Temperature control requires the use of nickel, titanium, or stainless steel coils.

Features and Specs for GeekVape Z Max Sub-ohm Tank:

• Base Diameter: 26mm
• Gold Plated 510 Contact Pin
• E-Liquid Capacity: 6.0ml
• Dual Top Fill Port System
• Dual Top Adjustable Airflow System
• Press-Fit Coil Installation
• Compatible with the Geekvape M Series Atomizer Heads

---

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.