YiHi SX Mini ML Class 75W Temperature Control Mod
The YiHi SX Mini ML Class 75W is the newest development from makers of the SX Mini. This device is designed for the power user looking for the next step in vaping. The device has revolutionary features, including temperature control functionality that supports Nickel, Titanium, and Stainless Steel wire. This device is one of the most advanced regulated mods to date. Featuring the new SXi-Q control system, your vaping experience can be fully customized.
The YiHi SX Mini ML Class 75W utilizes the YiHi SX350J-V2 Chip which provides an output of 75W and offers four different modes which can be selected to your own personal preferences. The device features a ergonomic design which is made out of a stainless steel and high-quality zinc alloy construction.
Features and Specs:
- Dimensions: 3-3/4" x 1-5/8" x 1"
- 510 Threaded
- Powered by the Yihi SX350J-V2 chip
- Temperature Control
- Variable Joules: Ni(Nickel) / Ti(Titanium) / SS(Stainless Steel)
- Joule mode: 10J-75J (200-580F / 100-300C)
- Requires (1) 18650 high amp battery (Sold Separately)
- Output Wattage: 5.0 - 75 Watts (85W in Bypass Mode)
- Output Voltage: 1.0 - 9.5 Volts
- Resistance: 0.05 ohm - 0.3 ohm (Joule Mode)
- Resistance: 0.15 ohm - 3.0 (Power Mode)
- DC-DC Converter
- Four modes: Powerful +, Powerful, Standard and Soft
- Charges through USB
- Stainless steel and high-quality zinc alloy construction
- Ergonomic design
- Rotary Display (Auto-Flip)
- Gravity sensor system
- Upgradeable Firmware
- Graphic user interface
- Low voltage protection
- Low resistance protection
- Short circuit protection
- High Temperature protection
- Reverse battery protection
Please note: We highly recommend using only external battery chargers for recharging the 18650s you use in your ML Class. The USB port is not covered under the manufacturer's full one year warranty, and if loosened due to frequent charge duty, may result in not being able to apply firmware updates, as well as a complete loss of USB charging capability.
Temperature control requires the use of nickel coils.
Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.
For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.
Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Battery Safety Warning:
Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.
Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.
Always charge in or on a fire-proof surface. Never leave charging batteries unattended.
Do not modify batteries or chargers in any shape or form.
Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.
Store your batteries away from the sun and heat to prevent overheating your batteries.
Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.
Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.
myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
|