Home > New Arrivals >

New!  Vandy Vape Mesh RDA
Vandy Vape Mesh RDA Rebuildable Drip Atomizer


 
Images are for illustration purposes only. Actual color, finish and packaging may vary.



Price: $31.99

Sold individually unless otherwise stated. See package contents below
Due to regulations, we are unable to ship E-Liquid into the state of Indiana.
:
VNV-MES10

Color

  

Qty:  
Description
 
Vandy Vape Mesh BF RDA - Rebuildable Dripping Atomizer

The Vandy Vape Mesh BF RDA is versatile rebuildable dripping atomizer that is compatible with both mesh and standard coil builds. The Mesh RDA features a unique invisible clamp style postless build deck that is compatible with both mesh, single and dual coil builds. The design of this build deck allows for easy and varied builds for an incredible and diverse vaping experience. The Mesh RDA features dual airflow slots that may be adjusted using the top airflow control ring. KA1, Ni80 and SS316L mesh wire is included for your convenience. A bottom feeding squonker pin is also included for squonk/bottom feeding mods.

The Mesh RDA includes an ULTEM wide bore drip. ULTEM is a high temperature plastic with a significantly higher melting point compared to Delrin. ULTEM is also a very hard material, making it a suitable choice when threading into stainless steel.

Quick Links:
Our Premium e-Liquid
Wick, Wire and Tools

Features and Specs:

  • Compatible with Mesh Wire and Standard Coil Builds
  • Dimensions: 1-7/16" x 15/16" (Including Drip Tip and Threads)
  • 24mm Diameter
  • Gold Plated 510 Contact Pin
  • 1.0ml Capacity
  • Unique Invisible Clamp Style Postless Build Deck
  • Compatible with Single and Dual Coil Builds
  • Dual Airflow Slots
  • Airflow Cap with Adjustable Top Airflow Control Ring
  • Includes Kanthal A1, NiChrome 80 and Stainless Steel 316L Mesh Wire
  • Includes (1) ULTEM Wide Bore Drip Tip and (1) Delrin Doc Drip Tip
  • Includes 510 Drip Tip Adapter
  • Includes Bottom Feeding Squonker Pin for Squonk/Bottom Feeding Mods

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.


Package Contents:
  • 1 x Vandy Vape Mesh RDA
    1 x Set of KA1 Mesh Wire
    1 x Set of Ni80 Mesh Wire
    1 x Set of SS316L Mesh Wire
    1 x 18.5mm Delrin Doc Drip Tip
    1 x BF Squonker Pin
    1 x 510 Drip Tip Adapter
    1 x Allen Key
    1 x Screwdriver
    1 x Set of Spare O-Rings and Screws

Average Customer Review: 4.5 of 5 Total Reviews: 3 Write a review, get a promo code!

  0 of 0 people found the following review helpful:
 
I use for wax September 23, 2017
Reviewer: Tue from TX United States  
This is a great wax vape. Just flatten out the mesh, and put wax on top.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great and easy to use rda September 12, 2017
Reviewer: Christopher Rabun from Thomson, GA United States  
All after watching a couple of reviews on this egging I decided to buy one to add to my collection.  After opening it took all of 5 minutes to "build" a setup. It comes with several strips of different grade mesh. I used stainless steelAnn's ended up with a .15 ohm build,  running TC Mode at 400 degrees f at 85 watts. It's a nice cool vapor and I'm highly satisfied with this rda. Way to go vandy vapes for knocking this one out of the park

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Decent Rda September 12, 2017
Reviewer: Jason Ratliff from Winchester, IN United States  
was a little disappointed with the mesh,  I kept getting dry hits no matter how much cotton I packed into it. However the rda is insanely easy to run reg coil builds in and it works well for me that way. I could be doing something wrong with the mesh though so take it for what it's worth

Was this review helpful to you?


Browse for more products in the same category as this item:

New Arrivals
Brands
Accessories
New Arrivals
Cartomizers & Tanks
Rebuildable Drip Atomizers (RDA)
Cartomizers & Tanks > Rebuildables
Brands > Vandy Vape
Cartomizers & Tanks > Vandy Vape