Anyvape CVI
Instruction Manual Not Included
Dimensions: 5.3"L x 0.9"D
Features:
- 510 Threaded and Ego Cone Threaded (510-Ego Adapter needed for Kanger Clearomizers)
- Wide drip well, fits most 510 and Ego Atomizers
- Uses 18650 battery (18mm x 65mm IMR)
- PCB with 4 Amperage output limit
- User selectable Voltage or Wattage Control
- Voltage Control Range: 3.0--6.0 V with 0.1 volt increments
- Wattage Control Range: 3.0--15.0 watts with 0.5 watt increments
- RMS Output
- Improved 360° turning button
- Short Circuit protection
- Reverse battery protection
- Battery Monitoring
- Over-Discharge Protection
- On/Off Mode
- Vented tail cap
- Oxidized aluminum body
- Clear digital display
- Selectable Main Info Display: atomizer/cartomizer resistance, battery under-load voltage, atomizer/cartomizer Output voltage
- One button-click menu system similar to the ZMAX
Menu system: The CVI has 7 menus. To configure them, push and release the silver button. Repeat until the screen displays the menu you would like to adjust. 3 seconds after the button has been released, the device will enter the setting options for the displayed menu. Push the silver button to scroll through these options. 3 seconds after the button has been released, the device will be set to the option that is display on the screen
1. Voltage up
2. Voltage down
3. Atomizer Lock: On/OFF: Lock or unlock the device to prevent accidental discharge when stored in pocket or purse
4. Battery Voltage: Display the remaining charge/voltage on the battery (fully charged battery reads 4.1v-4.2v)
5. LCD Screen: Set the LCD to display the information you would like to see when the device is in use; output voltage, resistance of attached atomizer, or battery voltage.
6. LCD on/off : Turn the LCD screen on or off while in use
7. V&P Model: Switch to variable volts or variable watts output (Voltage: Variable Voltage, Power: Variable Wattage)
The CVI will include a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Scratches and discoloration are considered normal wear and tear and is not covered by warranty.
NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries without a protection circuit is potentially hazardous
myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.